Timestamping Your YouTube Videos: Desktop & Mobile Guide

How to Add Timestamps on YouTube Video Link?

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

The Ultimate Guide to Antique-Themed Cinematography

How to Create Vintage Videos: A Comprehensive Tutorial

Richard Bennett

Mar 27, 2024• Proven solutions

“Every accomplishment starts with a decision to try.” – A Vintage Thought

Vintage videos are ultimately the retro videos you have ever imagined. The look is highly inspirational in itself. The vintage effect in photography and videos results in a must-see look that everyone wants to capture all day long. The meaning of vintage is ‘the time when something of quality was produced.’ When something is called retro, it means old, recognized, and essential. Vintage also resembles love apart from videos and photos. All in all, it’s a positive and result-oriented thing to carry on in your videos. And this is what we want to mention in this post relating to the creation of vintage videos.

Here are some vintage-style video ideas for you to have a look at.

• Part 1: What to Consider When Shooting a Vintage Video?
• Part 2: How to Create a Stunning Vintage Video?
• Part 3: Tips to Make Your Vintage Videos Stand Out

What to Consider When Shooting a Vintage Video?

Vintage videos are kind of old school vibes and must be shooting accordingly by keeping in mind the following points. These are a sort of expert tips given by photographers based on their practical experience. First of all, you have to understand that a video can be made vintage, but you can’t change the actual environment of shooting. Some editing always involves there in every project out there. Still, the tips given below will help you a lot in creating a retro look.

Use Vintage Lenses

The very first helpful tip is to use a vintage lens. They allow chromatic aberration by distorting colors around the frame. Furthermore, you can find various kinds of lenses in terms of a vintage effect.

Decrease Contrast

Do the correct color grading by reducing the contrast a little bit. You must not level the retro videos in black or white or like-new videos. You can simply add a contrasting effect and then reduce it to have that vintage look.

Keep it a little soft

If you have ever noticed, the vintage videos are a little soft and look like degraded with time. It’s a result of decreased sharpness in the camera’s menu settings. You can even add a slight blur to the final video or simply use recognized software made for video editing .

Brighten up the black levels

Lots of black points in the video are not ideal for a vintage effect. The suitable approach is to bring up black levels and make it dark gray instead of inky black. This look can be achieved either by levels effect or curves effect in your editing software.

Reduce Saturation levels

Bringing down the saturation levels is another tip to create a vintage effect. The old videos are also absent in bright colors. Don’t go too crazy about reduction as 20%-30% saturation level is more than enough.

How to Create a Stunning Vintage Video?

What you need to get started as both beginner and professional is Wondershare Filmora Video Editor. It is a highly recommended software to create vintage videos. The intuitive user interface and lots of editing functions are helpful for a video editor. It has both primary as well as advanced editing programs to check. It has various advanced color tuning tools to promote the making of original videos. It features tint, temperature, Vignette, 3D Luts, Lights, and so on.

Steps for the vintage effect to videos on Wondershare Filmora Video Editor

Step 1: Upload video & make specific changes

The very step is to add the video by clicking the + icon. We have added the three sample videos from the library of Wondershare Filmora itself. Adjust them in the timeline as per your requirements.

After doing all the essential editing functions, click on the Effects tab given at the upper-left corner. Simply type the word Old in the Search tab.

The Old Video filter will immediately appear in the list of filters. Tap the “+” icon in Old Video filter to add to the timeline. Drag its ends right or left to adjust the duration.

Step 2: Apply White & Black Filters

The second step is to apply the Black & White filters. Go to the Effects tab and explore five Black & White filters available. Each of these filters is quite different and must be applied accordingly. Check the aesthetic of your video clip before any filter application to retro videos.

Step 3: Add the Sun Kissed or Sepia Tone Rise Filters to the video clip

There are various other categories of filters you can apply, such as Retro, Sun Kissed, and Sepia Tone, etc. The features of Filmora also present several subcategories such as Faux Film or Shake.

On the other hand, the subcategory of Sepia Tone features Sun-Kissed & Rise Filters to stimulate sepia-tinted texture and recreate the old visual style. The Sun Kissed filter presents brown and red colors to give that warm image atmosphere.

Step 4: Desaturate Video Clip

Now, you need to desaturate the video clip with Ash & Willow filters. We have typed Ash in the Search bar, and you can see the filter below. These filters are essential to desaturate the video with preset contrast, brightness, or exposure values.

Then, we have combined the black & white filter with an overlay of Film Reel Horizontal. It will help you sell the effect and make the video look more authentic. However, the only application of Black & White or Ash & Willow filters is not going to make any creative thing in terms of vintage videos. You have to mix overlays with features such as Random Dust or Film Reel Horizontal.

Step 5: Apply Black & White and Old Film Color Correction Presets to the video

You can also access the Advanced color correction Tab of Filmora from the Color button. It also features Preset and Adjusts Tabs to desaturate footage. The Preset presents a variety of options, including Black & White and Old Film. You just need to right-click the particular preset and select the Apply option.

Tips to Make Your Vintage Videos Stand Out

Following the helpful tips would assist you in creating awesome retro videos.

• You can use various vintage apps such as Retro VHS, RTRO Camera, 8mm, Camcorder, VSCO, etc. Or, despite using these limited apps, you can directly use our preferred video editing software called Wondershare Filmora.
• If you use a specific vintage camera, keep it on low highlights and low contrasts. Use color grading, as we have discussed above. They help to provide the ultimate old-school effect.
• Always keep low saturation settings for shooting vintage videos. Take control over Saturation, Hue, and Luminance of video.
• Add overlays and respective filters to recreate a required vintage look. You must add things that dust, scratch, and grain the heck out from the video that you have created.
• Lower the frame rate or FPS to create an excellent vintage look. You can make it to 18 or 14 FPS depending upon the aesthetic requirements.
• Keep an eye on black and white filters you have used. It’s because more of a black and white can ruin the actual vintage experience.

Conclusion

So, this is an ultimate tutorial on the creation of vintage videos. We Hope you have admired the steps and our recommended video editing software. Vintage means grand, and thus you should make it amazing as well. It is the reason we have stated all facts regarding the vintage effect in our post above. Wondering how to add such effect in FCPX? check this article:How to Create a Vignette in Final Cut Pro X?

Surely give a read and thank us later!

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

“Every accomplishment starts with a decision to try.” – A Vintage Thought

Vintage videos are ultimately the retro videos you have ever imagined. The look is highly inspirational in itself. The vintage effect in photography and videos results in a must-see look that everyone wants to capture all day long. The meaning of vintage is ‘the time when something of quality was produced.’ When something is called retro, it means old, recognized, and essential. Vintage also resembles love apart from videos and photos. All in all, it’s a positive and result-oriented thing to carry on in your videos. And this is what we want to mention in this post relating to the creation of vintage videos.

Here are some vintage-style video ideas for you to have a look at.

• Part 1: What to Consider When Shooting a Vintage Video?
• Part 2: How to Create a Stunning Vintage Video?
• Part 3: Tips to Make Your Vintage Videos Stand Out

What to Consider When Shooting a Vintage Video?

Vintage videos are kind of old school vibes and must be shooting accordingly by keeping in mind the following points. These are a sort of expert tips given by photographers based on their practical experience. First of all, you have to understand that a video can be made vintage, but you can’t change the actual environment of shooting. Some editing always involves there in every project out there. Still, the tips given below will help you a lot in creating a retro look.

Use Vintage Lenses

The very first helpful tip is to use a vintage lens. They allow chromatic aberration by distorting colors around the frame. Furthermore, you can find various kinds of lenses in terms of a vintage effect.

Decrease Contrast

Do the correct color grading by reducing the contrast a little bit. You must not level the retro videos in black or white or like-new videos. You can simply add a contrasting effect and then reduce it to have that vintage look.

Keep it a little soft

If you have ever noticed, the vintage videos are a little soft and look like degraded with time. It’s a result of decreased sharpness in the camera’s menu settings. You can even add a slight blur to the final video or simply use recognized software made for video editing .

Brighten up the black levels

Lots of black points in the video are not ideal for a vintage effect. The suitable approach is to bring up black levels and make it dark gray instead of inky black. This look can be achieved either by levels effect or curves effect in your editing software.

Reduce Saturation levels

Bringing down the saturation levels is another tip to create a vintage effect. The old videos are also absent in bright colors. Don’t go too crazy about reduction as 20%-30% saturation level is more than enough.

How to Create a Stunning Vintage Video?

What you need to get started as both beginner and professional is Wondershare Filmora Video Editor. It is a highly recommended software to create vintage videos. The intuitive user interface and lots of editing functions are helpful for a video editor. It has both primary as well as advanced editing programs to check. It has various advanced color tuning tools to promote the making of original videos. It features tint, temperature, Vignette, 3D Luts, Lights, and so on.

Steps for the vintage effect to videos on Wondershare Filmora Video Editor

Step 1: Upload video & make specific changes

The very step is to add the video by clicking the + icon. We have added the three sample videos from the library of Wondershare Filmora itself. Adjust them in the timeline as per your requirements.

After doing all the essential editing functions, click on the Effects tab given at the upper-left corner. Simply type the word Old in the Search tab.

The Old Video filter will immediately appear in the list of filters. Tap the “+” icon in Old Video filter to add to the timeline. Drag its ends right or left to adjust the duration.

Step 2: Apply White & Black Filters

The second step is to apply the Black & White filters. Go to the Effects tab and explore five Black & White filters available. Each of these filters is quite different and must be applied accordingly. Check the aesthetic of your video clip before any filter application to retro videos.

Step 3: Add the Sun Kissed or Sepia Tone Rise Filters to the video clip

There are various other categories of filters you can apply, such as Retro, Sun Kissed, and Sepia Tone, etc. The features of Filmora also present several subcategories such as Faux Film or Shake.

On the other hand, the subcategory of Sepia Tone features Sun-Kissed & Rise Filters to stimulate sepia-tinted texture and recreate the old visual style. The Sun Kissed filter presents brown and red colors to give that warm image atmosphere.

Step 4: Desaturate Video Clip

Now, you need to desaturate the video clip with Ash & Willow filters. We have typed Ash in the Search bar, and you can see the filter below. These filters are essential to desaturate the video with preset contrast, brightness, or exposure values.

Then, we have combined the black & white filter with an overlay of Film Reel Horizontal. It will help you sell the effect and make the video look more authentic. However, the only application of Black & White or Ash & Willow filters is not going to make any creative thing in terms of vintage videos. You have to mix overlays with features such as Random Dust or Film Reel Horizontal.

Step 5: Apply Black & White and Old Film Color Correction Presets to the video

You can also access the Advanced color correction Tab of Filmora from the Color button. It also features Preset and Adjusts Tabs to desaturate footage. The Preset presents a variety of options, including Black & White and Old Film. You just need to right-click the particular preset and select the Apply option.

Tips to Make Your Vintage Videos Stand Out

Following the helpful tips would assist you in creating awesome retro videos.

• You can use various vintage apps such as Retro VHS, RTRO Camera, 8mm, Camcorder, VSCO, etc. Or, despite using these limited apps, you can directly use our preferred video editing software called Wondershare Filmora.
• If you use a specific vintage camera, keep it on low highlights and low contrasts. Use color grading, as we have discussed above. They help to provide the ultimate old-school effect.
• Always keep low saturation settings for shooting vintage videos. Take control over Saturation, Hue, and Luminance of video.
• Add overlays and respective filters to recreate a required vintage look. You must add things that dust, scratch, and grain the heck out from the video that you have created.
• Lower the frame rate or FPS to create an excellent vintage look. You can make it to 18 or 14 FPS depending upon the aesthetic requirements.
• Keep an eye on black and white filters you have used. It’s because more of a black and white can ruin the actual vintage experience.

Conclusion

So, this is an ultimate tutorial on the creation of vintage videos. We Hope you have admired the steps and our recommended video editing software. Vintage means grand, and thus you should make it amazing as well. It is the reason we have stated all facts regarding the vintage effect in our post above. Wondering how to add such effect in FCPX? check this article:How to Create a Vignette in Final Cut Pro X?

Surely give a read and thank us later!

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

“Every accomplishment starts with a decision to try.” – A Vintage Thought

Vintage videos are ultimately the retro videos you have ever imagined. The look is highly inspirational in itself. The vintage effect in photography and videos results in a must-see look that everyone wants to capture all day long. The meaning of vintage is ‘the time when something of quality was produced.’ When something is called retro, it means old, recognized, and essential. Vintage also resembles love apart from videos and photos. All in all, it’s a positive and result-oriented thing to carry on in your videos. And this is what we want to mention in this post relating to the creation of vintage videos.

Here are some vintage-style video ideas for you to have a look at.

• Part 1: What to Consider When Shooting a Vintage Video?
• Part 2: How to Create a Stunning Vintage Video?
• Part 3: Tips to Make Your Vintage Videos Stand Out

What to Consider When Shooting a Vintage Video?

Vintage videos are kind of old school vibes and must be shooting accordingly by keeping in mind the following points. These are a sort of expert tips given by photographers based on their practical experience. First of all, you have to understand that a video can be made vintage, but you can’t change the actual environment of shooting. Some editing always involves there in every project out there. Still, the tips given below will help you a lot in creating a retro look.

Use Vintage Lenses

The very first helpful tip is to use a vintage lens. They allow chromatic aberration by distorting colors around the frame. Furthermore, you can find various kinds of lenses in terms of a vintage effect.

Decrease Contrast

Do the correct color grading by reducing the contrast a little bit. You must not level the retro videos in black or white or like-new videos. You can simply add a contrasting effect and then reduce it to have that vintage look.

Keep it a little soft

If you have ever noticed, the vintage videos are a little soft and look like degraded with time. It’s a result of decreased sharpness in the camera’s menu settings. You can even add a slight blur to the final video or simply use recognized software made for video editing .

Brighten up the black levels

Lots of black points in the video are not ideal for a vintage effect. The suitable approach is to bring up black levels and make it dark gray instead of inky black. This look can be achieved either by levels effect or curves effect in your editing software.

Reduce Saturation levels

Bringing down the saturation levels is another tip to create a vintage effect. The old videos are also absent in bright colors. Don’t go too crazy about reduction as 20%-30% saturation level is more than enough.

How to Create a Stunning Vintage Video?

What you need to get started as both beginner and professional is Wondershare Filmora Video Editor. It is a highly recommended software to create vintage videos. The intuitive user interface and lots of editing functions are helpful for a video editor. It has both primary as well as advanced editing programs to check. It has various advanced color tuning tools to promote the making of original videos. It features tint, temperature, Vignette, 3D Luts, Lights, and so on.

Steps for the vintage effect to videos on Wondershare Filmora Video Editor

Step 1: Upload video & make specific changes

The very step is to add the video by clicking the + icon. We have added the three sample videos from the library of Wondershare Filmora itself. Adjust them in the timeline as per your requirements.

After doing all the essential editing functions, click on the Effects tab given at the upper-left corner. Simply type the word Old in the Search tab.

The Old Video filter will immediately appear in the list of filters. Tap the “+” icon in Old Video filter to add to the timeline. Drag its ends right or left to adjust the duration.

Step 2: Apply White & Black Filters

The second step is to apply the Black & White filters. Go to the Effects tab and explore five Black & White filters available. Each of these filters is quite different and must be applied accordingly. Check the aesthetic of your video clip before any filter application to retro videos.

Step 3: Add the Sun Kissed or Sepia Tone Rise Filters to the video clip

There are various other categories of filters you can apply, such as Retro, Sun Kissed, and Sepia Tone, etc. The features of Filmora also present several subcategories such as Faux Film or Shake.

On the other hand, the subcategory of Sepia Tone features Sun-Kissed & Rise Filters to stimulate sepia-tinted texture and recreate the old visual style. The Sun Kissed filter presents brown and red colors to give that warm image atmosphere.

Step 4: Desaturate Video Clip

Now, you need to desaturate the video clip with Ash & Willow filters. We have typed Ash in the Search bar, and you can see the filter below. These filters are essential to desaturate the video with preset contrast, brightness, or exposure values.

Then, we have combined the black & white filter with an overlay of Film Reel Horizontal. It will help you sell the effect and make the video look more authentic. However, the only application of Black & White or Ash & Willow filters is not going to make any creative thing in terms of vintage videos. You have to mix overlays with features such as Random Dust or Film Reel Horizontal.

Step 5: Apply Black & White and Old Film Color Correction Presets to the video

You can also access the Advanced color correction Tab of Filmora from the Color button. It also features Preset and Adjusts Tabs to desaturate footage. The Preset presents a variety of options, including Black & White and Old Film. You just need to right-click the particular preset and select the Apply option.

Tips to Make Your Vintage Videos Stand Out

Following the helpful tips would assist you in creating awesome retro videos.

• You can use various vintage apps such as Retro VHS, RTRO Camera, 8mm, Camcorder, VSCO, etc. Or, despite using these limited apps, you can directly use our preferred video editing software called Wondershare Filmora.
• If you use a specific vintage camera, keep it on low highlights and low contrasts. Use color grading, as we have discussed above. They help to provide the ultimate old-school effect.
• Always keep low saturation settings for shooting vintage videos. Take control over Saturation, Hue, and Luminance of video.
• Add overlays and respective filters to recreate a required vintage look. You must add things that dust, scratch, and grain the heck out from the video that you have created.
• Lower the frame rate or FPS to create an excellent vintage look. You can make it to 18 or 14 FPS depending upon the aesthetic requirements.
• Keep an eye on black and white filters you have used. It’s because more of a black and white can ruin the actual vintage experience.

Conclusion

So, this is an ultimate tutorial on the creation of vintage videos. We Hope you have admired the steps and our recommended video editing software. Vintage means grand, and thus you should make it amazing as well. It is the reason we have stated all facts regarding the vintage effect in our post above. Wondering how to add such effect in FCPX? check this article:How to Create a Vignette in Final Cut Pro X?

Surely give a read and thank us later!

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

“Every accomplishment starts with a decision to try.” – A Vintage Thought

Vintage videos are ultimately the retro videos you have ever imagined. The look is highly inspirational in itself. The vintage effect in photography and videos results in a must-see look that everyone wants to capture all day long. The meaning of vintage is ‘the time when something of quality was produced.’ When something is called retro, it means old, recognized, and essential. Vintage also resembles love apart from videos and photos. All in all, it’s a positive and result-oriented thing to carry on in your videos. And this is what we want to mention in this post relating to the creation of vintage videos.

Here are some vintage-style video ideas for you to have a look at.

• Part 1: What to Consider When Shooting a Vintage Video?
• Part 2: How to Create a Stunning Vintage Video?
• Part 3: Tips to Make Your Vintage Videos Stand Out

What to Consider When Shooting a Vintage Video?

Vintage videos are kind of old school vibes and must be shooting accordingly by keeping in mind the following points. These are a sort of expert tips given by photographers based on their practical experience. First of all, you have to understand that a video can be made vintage, but you can’t change the actual environment of shooting. Some editing always involves there in every project out there. Still, the tips given below will help you a lot in creating a retro look.

Use Vintage Lenses

The very first helpful tip is to use a vintage lens. They allow chromatic aberration by distorting colors around the frame. Furthermore, you can find various kinds of lenses in terms of a vintage effect.

Decrease Contrast

Do the correct color grading by reducing the contrast a little bit. You must not level the retro videos in black or white or like-new videos. You can simply add a contrasting effect and then reduce it to have that vintage look.

Keep it a little soft

If you have ever noticed, the vintage videos are a little soft and look like degraded with time. It’s a result of decreased sharpness in the camera’s menu settings. You can even add a slight blur to the final video or simply use recognized software made for video editing .

Brighten up the black levels

Lots of black points in the video are not ideal for a vintage effect. The suitable approach is to bring up black levels and make it dark gray instead of inky black. This look can be achieved either by levels effect or curves effect in your editing software.

Reduce Saturation levels

Bringing down the saturation levels is another tip to create a vintage effect. The old videos are also absent in bright colors. Don’t go too crazy about reduction as 20%-30% saturation level is more than enough.

How to Create a Stunning Vintage Video?

What you need to get started as both beginner and professional is Wondershare Filmora Video Editor. It is a highly recommended software to create vintage videos. The intuitive user interface and lots of editing functions are helpful for a video editor. It has both primary as well as advanced editing programs to check. It has various advanced color tuning tools to promote the making of original videos. It features tint, temperature, Vignette, 3D Luts, Lights, and so on.

Steps for the vintage effect to videos on Wondershare Filmora Video Editor

Step 1: Upload video & make specific changes

The very step is to add the video by clicking the + icon. We have added the three sample videos from the library of Wondershare Filmora itself. Adjust them in the timeline as per your requirements.

After doing all the essential editing functions, click on the Effects tab given at the upper-left corner. Simply type the word Old in the Search tab.

The Old Video filter will immediately appear in the list of filters. Tap the “+” icon in Old Video filter to add to the timeline. Drag its ends right or left to adjust the duration.

Step 2: Apply White & Black Filters

The second step is to apply the Black & White filters. Go to the Effects tab and explore five Black & White filters available. Each of these filters is quite different and must be applied accordingly. Check the aesthetic of your video clip before any filter application to retro videos.

Step 3: Add the Sun Kissed or Sepia Tone Rise Filters to the video clip

There are various other categories of filters you can apply, such as Retro, Sun Kissed, and Sepia Tone, etc. The features of Filmora also present several subcategories such as Faux Film or Shake.

On the other hand, the subcategory of Sepia Tone features Sun-Kissed & Rise Filters to stimulate sepia-tinted texture and recreate the old visual style. The Sun Kissed filter presents brown and red colors to give that warm image atmosphere.

Step 4: Desaturate Video Clip

Now, you need to desaturate the video clip with Ash & Willow filters. We have typed Ash in the Search bar, and you can see the filter below. These filters are essential to desaturate the video with preset contrast, brightness, or exposure values.

Then, we have combined the black & white filter with an overlay of Film Reel Horizontal. It will help you sell the effect and make the video look more authentic. However, the only application of Black & White or Ash & Willow filters is not going to make any creative thing in terms of vintage videos. You have to mix overlays with features such as Random Dust or Film Reel Horizontal.

Step 5: Apply Black & White and Old Film Color Correction Presets to the video

You can also access the Advanced color correction Tab of Filmora from the Color button. It also features Preset and Adjusts Tabs to desaturate footage. The Preset presents a variety of options, including Black & White and Old Film. You just need to right-click the particular preset and select the Apply option.

Tips to Make Your Vintage Videos Stand Out

Following the helpful tips would assist you in creating awesome retro videos.

• You can use various vintage apps such as Retro VHS, RTRO Camera, 8mm, Camcorder, VSCO, etc. Or, despite using these limited apps, you can directly use our preferred video editing software called Wondershare Filmora.
• If you use a specific vintage camera, keep it on low highlights and low contrasts. Use color grading, as we have discussed above. They help to provide the ultimate old-school effect.
• Always keep low saturation settings for shooting vintage videos. Take control over Saturation, Hue, and Luminance of video.
• Add overlays and respective filters to recreate a required vintage look. You must add things that dust, scratch, and grain the heck out from the video that you have created.
• Lower the frame rate or FPS to create an excellent vintage look. You can make it to 18 or 14 FPS depending upon the aesthetic requirements.
• Keep an eye on black and white filters you have used. It’s because more of a black and white can ruin the actual vintage experience.

Conclusion

So, this is an ultimate tutorial on the creation of vintage videos. We Hope you have admired the steps and our recommended video editing software. Vintage means grand, and thus you should make it amazing as well. It is the reason we have stated all facts regarding the vintage effect in our post above. Wondering how to add such effect in FCPX? check this article:How to Create a Vignette in Final Cut Pro X?

Surely give a read and thank us later!

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read: