"Sonic Gold Standard 10 Ways to Elevate Home Recordings"
Sonic Gold Standard: 10 Ways to Elevate Home Recordings
10 Recording Tips for Recording Audio with High Quality
##### Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
### **6\. Adjust your levels**Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
### **2\. Put your mobile phone in airplane mode**Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
1. Silence everything you don’t want your microphone to record
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
### **4\. Block wind from reaching your microphone**Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
### **5\. Upgrade your microphone**As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
### **6\. Adjust your levels**Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
### **9\. ADR**When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
6. Adjust your levels
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
10. Record Ambient Sound
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
YouTube is one of the most leading social media platforms attracting a huge number of people each day. Recently YouTube has launched a new concept known as YouTube shorts which is a short, crisp 60 or fewer seconds of video content. YouTube shorts has been successful in attracting viewers to the platform. Along with the video the platform allows you to write a text which is a YouTube shorts description to give some idea about your video to viewers.
Let’s talk about in YouTube shorts description in detail and learn ways to write on the platform.
In this article
01 What is YouTube Shorts Description?
02 Why is YouTube Shorts Description Important?
03 How do you Write a Description on YouTube Shorts?
04 Tips for Writing Effective YouTube Shorts Description
YouTube shorts description means a simple text or a message written below to your YouTube shorts giving an idea about the uploaded YouTube shorts video to the viewers.
Such a YouTube short description helps viewers in getting some hint about the video and to decide whether the video is what they are looking for or not. Also, we can also add additional information such as relevant links and hashtags to the video.
Source: adweek.com
Part 2: Why is YouTube Shorts Description Important?
YouTube shorts description plays an important role in attracting viewers and growing your channel. There are a few reasons behind is such as
It gives a simple idea and context about your video to viewers.
Attractive and appealing YouTube short descriptions would easily catch the attention of viewers.
It let viewers decide whether the YouTube shorts video is what they are looking for or not.
You can add relevant hashtags to your video in the description as well to gain more views.
Part 3: How do you Write a Description on YouTube Shorts?
Let’s talk about ways to write a YouTube shorts description with easy to follow steps:
Step 1: At first you need to open the YouTube homepage and select a Library in the bottom right corner of the screen.
Step 2: Once you do that now click on any of your Videos.
Step 3: Then after pick a YouTube shorts video where you want to add a description and click on the three dots beside it. You would find a menu where click on edit.
Step 4: Now you can add the relevant YouTube shorts description and tags. Then click on save and you are all done.
So you can follow above mentioned easy step guidance and write the most iconic YouTube shorts description on your channel.
Part 4: Tips for Writing Effective YouTube Shorts Description
There are some of the key points to keep in mind while writing a YouTube shorts description. All these tips would surely help your videos gain more views.
While writing a YouTube shorts description is very important that you are well aware of which keywords to use. Here your choice of keywords will play a key role in ranking your videos up.
If you are not aware of the right keywords about your YouTube shorts then you could take online help of an online keyword planner. You must be including the right keywords on your YouTube shorts description to make it more searchable.
3. Know where to place your keywords
You should make sure to put your primary keywords on the first three sentences only and the reason is that users always would notice on the initial part of your description.
### 4\. Track the keywordsAlways keep an eye on knowing which keywords are working and which are not for you. It would help you decide your YouTube shorts description in that manner and generate more traffic.
Along with your video content have a look at what other things are attracting your audience. You can always check out that and based on that plan and deliver your upcoming YouTube shorts.
Conclusion
Thus YouTube shorts has become already successful in catching the eye of users and allowing the platform to grow. Along with the video, the platform allows users to add YouTube short descriptions to appeal audience in a right and effective manner. We have talked about YouTube shorts description and the importance of it in growing your video channel in detail.
Now it is time for you to pick the right YouTube shorts description for your video and get a maximum number of views on your channel.
02 Why is YouTube Shorts Description Important?
03 How do you Write a Description on YouTube Shorts?
04 Tips for Writing Effective YouTube Shorts Description
Part 1: What is YouTube Shorts Description?
YouTube shorts description means a simple text or a message written below to your YouTube shorts giving an idea about the uploaded YouTube shorts video to the viewers.
Such a YouTube short description helps viewers in getting some hint about the video and to decide whether the video is what they are looking for or not. Also, we can also add additional information such as relevant links and hashtags to the video.
YouTube shorts description plays an important role in attracting viewers and growing your channel. There are a few reasons behind is such as
It gives a simple idea and context about your video to viewers.
Attractive and appealing YouTube short descriptions would easily catch the attention of viewers.
It let viewers decide whether the YouTube shorts video is what they are looking for or not.
You can add relevant hashtags to your video in the description as well to gain more views.
Part 3: How do you Write a Description on YouTube Shorts?
Let’s talk about ways to write a YouTube shorts description with easy to follow steps:
Step 1: At first you need to open the YouTube homepage and select a Library in the bottom right corner of the screen.
Step 2: Once you do that now click on any of your Videos.
Step 3: Then after pick a YouTube shorts video where you want to add a description and click on the three dots beside it. You would find a menu where click on edit.
Step 4: Now you can add the relevant YouTube shorts description and tags. Then click on save and you are all done.
So you can follow above mentioned easy step guidance and write the most iconic YouTube shorts description on your channel.
Part 4: Tips for Writing Effective YouTube Shorts Description
There are some of the key points to keep in mind while writing a YouTube shorts description. All these tips would surely help your videos gain more views.
1. Be specific
While writing a YouTube shorts description is very important that you are well aware of which keywords to use. Here your choice of keywords will play a key role in ranking your videos up.
2. Do keyword research
If you are not aware of the right keywords about your YouTube shorts then you could take online help of an online keyword planner. You must be including the right keywords on your YouTube shorts description to make it more searchable.
### 3\. Know where to place your keywordsYou should make sure to put your primary keywords on the first three sentences only and the reason is that users always would notice on the initial part of your description.
4. Track the keywords
Always keep an eye on knowing which keywords are working and which are not for you. It would help you decide your YouTube shorts description in that manner and generate more traffic.
5. Find other interests of your audience
Along with your video content have a look at what other things are attracting your audience. You can always check out that and based on that plan and deliver your upcoming YouTube shorts.
Conclusion
Thus YouTube shorts has become already successful in catching the eye of users and allowing the platform to grow. Along with the video, the platform allows users to add YouTube short descriptions to appeal audience in a right and effective manner. We have talked about YouTube shorts description and the importance of it in growing your video channel in detail.
Now it is time for you to pick the right YouTube shorts description for your video and get a maximum number of views on your channel.
02 Why is YouTube Shorts Description Important?
03 How do you Write a Description on YouTube Shorts?
04 Tips for Writing Effective YouTube Shorts Description
YouTube shorts description means a simple text or a message written below to your YouTube shorts giving an idea about the uploaded YouTube shorts video to the viewers.
Such a YouTube short description helps viewers in getting some hint about the video and to decide whether the video is what they are looking for or not. Also, we can also add additional information such as relevant links and hashtags to the video.
Source: adweek.com
Part 2: Why is YouTube Shorts Description Important?
YouTube shorts description plays an important role in attracting viewers and growing your channel. There are a few reasons behind is such as
It gives a simple idea and context about your video to viewers.
Attractive and appealing YouTube short descriptions would easily catch the attention of viewers.
It let viewers decide whether the YouTube shorts video is what they are looking for or not.
You can add relevant hashtags to your video in the description as well to gain more views.
Part 3: How do you Write a Description on YouTube Shorts?
Let’s talk about ways to write a YouTube shorts description with easy to follow steps:
Step 1: At first you need to open the YouTube homepage and select a Library in the bottom right corner of the screen.
Step 2: Once you do that now click on any of your Videos.
Step 3: Then after pick a YouTube shorts video where you want to add a description and click on the three dots beside it. You would find a menu where click on edit.
Step 4: Now you can add the relevant YouTube shorts description and tags. Then click on save and you are all done.
So you can follow above mentioned easy step guidance and write the most iconic YouTube shorts description on your channel.
Part 4: Tips for Writing Effective YouTube Shorts Description
There are some of the key points to keep in mind while writing a YouTube shorts description. All these tips would surely help your videos gain more views.
While writing a YouTube shorts description is very important that you are well aware of which keywords to use. Here your choice of keywords will play a key role in ranking your videos up.
If you are not aware of the right keywords about your YouTube shorts then you could take online help of an online keyword planner. You must be including the right keywords on your YouTube shorts description to make it more searchable.
You should make sure to put your primary keywords on the first three sentences only and the reason is that users always would notice on the initial part of your description.
Always keep an eye on knowing which keywords are working and which are not for you. It would help you decide your YouTube shorts description in that manner and generate more traffic.
5. Find other interests of your audience
Along with your video content have a look at what other things are attracting your audience. You can always check out that and based on that plan and deliver your upcoming YouTube shorts.
Conclusion
Thus YouTube shorts has become already successful in catching the eye of users and allowing the platform to grow. Along with the video, the platform allows users to add YouTube short descriptions to appeal audience in a right and effective manner. We have talked about YouTube shorts description and the importance of it in growing your video channel in detail.
Now it is time for you to pick the right YouTube shorts description for your video and get a maximum number of views on your channel.
02 Why is YouTube Shorts Description Important?
03 How do you Write a Description on YouTube Shorts?
04 Tips for Writing Effective YouTube Shorts Description
Part 1: What is YouTube Shorts Description?
YouTube shorts description means a simple text or a message written below to your YouTube shorts giving an idea about the uploaded YouTube shorts video to the viewers.
Such a YouTube short description helps viewers in getting some hint about the video and to decide whether the video is what they are looking for or not. Also, we can also add additional information such as relevant links and hashtags to the video.
Source: adweek.com
YouTube shorts description plays an important role in attracting viewers and growing your channel. There are a few reasons behind is such as
It gives a simple idea and context about your video to viewers.
Attractive and appealing YouTube short descriptions would easily catch the attention of viewers.
It let viewers decide whether the YouTube shorts video is what they are looking for or not.
You can add relevant hashtags to your video in the description as well to gain more views.
Let’s talk about ways to write a YouTube shorts description with easy to follow steps:
Step 1: At first you need to open the YouTube homepage and select a Library in the bottom right corner of the screen.
Step 2: Once you do that now click on any of your Videos.
Step 3: Then after pick a YouTube shorts video where you want to add a description and click on the three dots beside it. You would find a menu where click on edit.
Step 4: Now you can add the relevant YouTube shorts description and tags. Then click on save and you are all done.
So you can follow above mentioned easy step guidance and write the most iconic YouTube shorts description on your channel.
Part 4: Tips for Writing Effective YouTube Shorts Description
There are some of the key points to keep in mind while writing a YouTube shorts description. All these tips would surely help your videos gain more views.
While writing a YouTube shorts description is very important that you are well aware of which keywords to use. Here your choice of keywords will play a key role in ranking your videos up.
If you are not aware of the right keywords about your YouTube shorts then you could take online help of an online keyword planner. You must be including the right keywords on your YouTube shorts description to make it more searchable.
3. Know where to place your keywords
You should make sure to put your primary keywords on the first three sentences only and the reason is that users always would notice on the initial part of your description.
4. Track the keywords
Always keep an eye on knowing which keywords are working and which are not for you. It would help you decide your YouTube shorts description in that manner and generate more traffic.
Along with your video content have a look at what other things are attracting your audience. You can always check out that and based on that plan and deliver your upcoming YouTube shorts.
### ConclusionThus YouTube shorts has become already successful in catching the eye of users and allowing the platform to grow. Along with the video, the platform allows users to add YouTube short descriptions to appeal audience in a right and effective manner. We have talked about YouTube shorts description and the importance of it in growing your video channel in detail.
Now it is time for you to pick the right YouTube shorts description for your video and get a maximum number of views on your channel.
- Title: Sonic Gold Standard 10 Ways to Elevate Home Recordings
- Author: Steven
- Created at : 2024-09-06 12:15:52
- Updated at : 2024-09-07 12:15:52
- Link: https://youtube-clips.techidaily.com/sonic-gold-standard-10-ways-to-elevate-home-recordings/
- License: This work is licensed under CC BY-NC-SA 4.0.