"[New] Audio Clarity  10 Pro Tips for High-Quality Recordings"

"[New] Audio Clarity 10 Pro Tips for High-Quality Recordings"

Steven Lv12

Audio Clarity: 10 Pro Tips for High-Quality Recordings

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

From Still Photos to Dynamic Video: How To Use Your Cellular Device

How To Make YouTube Videos on Your Smartphone

author avatar

Richard Bennett

Mar 27, 2024• Proven solutions

It is fun to be able to record a vlog entry whenever inspiration strikes you, and your smartphone is a great choice for recording on the go. Smartphones have really great cameras, and you probably always have your phone with you. You can even post directly from your phone to YouTube!

How To Make YouTube Videos on Your Smartphone

Making a video on your smartphone is similar to making a video with any other camera in a lot of ways. There are also a lot of ways in which it is different. You always have to watch out for camera shake, for example, but it can be even harder to control when you’re walking around shooting on your mobile device. Here are three things to keep in mind when vlogging with your smartphone.

Part 1. Keep It Steady

For a nice, smooth, shot consider resting your hand up on a railing, table, or anything else that will keep it steady while you film. Camera shake is always distracting to viewers, and smartphone videos are notoriously unstable because you are almost always holding your phone in your hand.

There is equipment you can use to cut out camera shake. You can get a smartphone mount for your tripod, or you can even stabilize your phone using a selfie stick. Many of the very newest smartphones have built in hardware called ‘OIS’ – optical image stabilization – that helps reduce shakiness.

Part 2. Be Heard

You have a lot to say, so make sure people can hear you say it! Smartphones do not tend to have very good microphones built in (neither do most cameras), so try to vlog from somewhere without a lot of background noise. It will help a lot if your voice has nothing to compete with.

Ideally, you should get an external mic to record your voice while you vlog on your phone. There are shotgun mics you can plug directly into the audio jack on your phone which will record great audio, or you can get a high quality MP3 recorder and carry it around in your pocket.

Part 3. Tilt Your Phone

When recording on the spur of the moment with your smartphone it is easy to automatically hold it the same way you would while texting or taking a selfie. If you record a video with your phone held so that it is tall – a ‘portrait’ shot – then your video will have thick black bars on either side when you post it to YouTube. If you tilt your phone so that it is wide you will record a ‘landscape’ shot, which will match the dimensions YouTube plays videos in.

The exception to this is videos you plan to post on Instagram. On Instagram everything is cropped into a square, and it is easier to imagine what your footage will look like as a square when you hold your phone strait up. Simply focus on the top of your screen and treat a portion of the bottom of your screen as if it is not there. When you hold your phone horizontally you need to try and estimate how much of the middle of your screen will make it in to your Instagram video, which can be awkward.

Those are the three main things to keep in mind, but if you are planning on posting directly to YouTube from your phone then you should also make sure you have a mobile app you can use to edit it first.

Filmora is a full-feature video editing app available for both Android and iPhone operating systems. With Filmora you can make awesome YouTube videos quickly using Filmora’s one-touch themes, or take a little bit more time personalizing your creation. One-touch themes are sets of related features, like filters and animated titles, which you can apply to your videos all at once. Filmora’s simple interface also makes it easy to apply filters, titles, overlays, transitions, and even royalty free music to your project one at a time.

After you’ve edited your video in Filmora you can post it directly to YouTube or other social media sites right from the app.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is fun to be able to record a vlog entry whenever inspiration strikes you, and your smartphone is a great choice for recording on the go. Smartphones have really great cameras, and you probably always have your phone with you. You can even post directly from your phone to YouTube!

How To Make YouTube Videos on Your Smartphone

Making a video on your smartphone is similar to making a video with any other camera in a lot of ways. There are also a lot of ways in which it is different. You always have to watch out for camera shake, for example, but it can be even harder to control when you’re walking around shooting on your mobile device. Here are three things to keep in mind when vlogging with your smartphone.

Part 1. Keep It Steady

For a nice, smooth, shot consider resting your hand up on a railing, table, or anything else that will keep it steady while you film. Camera shake is always distracting to viewers, and smartphone videos are notoriously unstable because you are almost always holding your phone in your hand.

There is equipment you can use to cut out camera shake. You can get a smartphone mount for your tripod, or you can even stabilize your phone using a selfie stick. Many of the very newest smartphones have built in hardware called ‘OIS’ – optical image stabilization – that helps reduce shakiness.

Part 2. Be Heard

You have a lot to say, so make sure people can hear you say it! Smartphones do not tend to have very good microphones built in (neither do most cameras), so try to vlog from somewhere without a lot of background noise. It will help a lot if your voice has nothing to compete with.

Ideally, you should get an external mic to record your voice while you vlog on your phone. There are shotgun mics you can plug directly into the audio jack on your phone which will record great audio, or you can get a high quality MP3 recorder and carry it around in your pocket.

Part 3. Tilt Your Phone

When recording on the spur of the moment with your smartphone it is easy to automatically hold it the same way you would while texting or taking a selfie. If you record a video with your phone held so that it is tall – a ‘portrait’ shot – then your video will have thick black bars on either side when you post it to YouTube. If you tilt your phone so that it is wide you will record a ‘landscape’ shot, which will match the dimensions YouTube plays videos in.

The exception to this is videos you plan to post on Instagram. On Instagram everything is cropped into a square, and it is easier to imagine what your footage will look like as a square when you hold your phone strait up. Simply focus on the top of your screen and treat a portion of the bottom of your screen as if it is not there. When you hold your phone horizontally you need to try and estimate how much of the middle of your screen will make it in to your Instagram video, which can be awkward.

Those are the three main things to keep in mind, but if you are planning on posting directly to YouTube from your phone then you should also make sure you have a mobile app you can use to edit it first.

Filmora is a full-feature video editing app available for both Android and iPhone operating systems. With Filmora you can make awesome YouTube videos quickly using Filmora’s one-touch themes, or take a little bit more time personalizing your creation. One-touch themes are sets of related features, like filters and animated titles, which you can apply to your videos all at once. Filmora’s simple interface also makes it easy to apply filters, titles, overlays, transitions, and even royalty free music to your project one at a time.

After you’ve edited your video in Filmora you can post it directly to YouTube or other social media sites right from the app.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is fun to be able to record a vlog entry whenever inspiration strikes you, and your smartphone is a great choice for recording on the go. Smartphones have really great cameras, and you probably always have your phone with you. You can even post directly from your phone to YouTube!

How To Make YouTube Videos on Your Smartphone

Making a video on your smartphone is similar to making a video with any other camera in a lot of ways. There are also a lot of ways in which it is different. You always have to watch out for camera shake, for example, but it can be even harder to control when you’re walking around shooting on your mobile device. Here are three things to keep in mind when vlogging with your smartphone.

Part 1. Keep It Steady

For a nice, smooth, shot consider resting your hand up on a railing, table, or anything else that will keep it steady while you film. Camera shake is always distracting to viewers, and smartphone videos are notoriously unstable because you are almost always holding your phone in your hand.

There is equipment you can use to cut out camera shake. You can get a smartphone mount for your tripod, or you can even stabilize your phone using a selfie stick. Many of the very newest smartphones have built in hardware called ‘OIS’ – optical image stabilization – that helps reduce shakiness.

Part 2. Be Heard

You have a lot to say, so make sure people can hear you say it! Smartphones do not tend to have very good microphones built in (neither do most cameras), so try to vlog from somewhere without a lot of background noise. It will help a lot if your voice has nothing to compete with.

Ideally, you should get an external mic to record your voice while you vlog on your phone. There are shotgun mics you can plug directly into the audio jack on your phone which will record great audio, or you can get a high quality MP3 recorder and carry it around in your pocket.

Part 3. Tilt Your Phone

When recording on the spur of the moment with your smartphone it is easy to automatically hold it the same way you would while texting or taking a selfie. If you record a video with your phone held so that it is tall – a ‘portrait’ shot – then your video will have thick black bars on either side when you post it to YouTube. If you tilt your phone so that it is wide you will record a ‘landscape’ shot, which will match the dimensions YouTube plays videos in.

The exception to this is videos you plan to post on Instagram. On Instagram everything is cropped into a square, and it is easier to imagine what your footage will look like as a square when you hold your phone strait up. Simply focus on the top of your screen and treat a portion of the bottom of your screen as if it is not there. When you hold your phone horizontally you need to try and estimate how much of the middle of your screen will make it in to your Instagram video, which can be awkward.

Those are the three main things to keep in mind, but if you are planning on posting directly to YouTube from your phone then you should also make sure you have a mobile app you can use to edit it first.

Filmora is a full-feature video editing app available for both Android and iPhone operating systems. With Filmora you can make awesome YouTube videos quickly using Filmora’s one-touch themes, or take a little bit more time personalizing your creation. One-touch themes are sets of related features, like filters and animated titles, which you can apply to your videos all at once. Filmora’s simple interface also makes it easy to apply filters, titles, overlays, transitions, and even royalty free music to your project one at a time.

After you’ve edited your video in Filmora you can post it directly to YouTube or other social media sites right from the app.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is fun to be able to record a vlog entry whenever inspiration strikes you, and your smartphone is a great choice for recording on the go. Smartphones have really great cameras, and you probably always have your phone with you. You can even post directly from your phone to YouTube!

How To Make YouTube Videos on Your Smartphone

Making a video on your smartphone is similar to making a video with any other camera in a lot of ways. There are also a lot of ways in which it is different. You always have to watch out for camera shake, for example, but it can be even harder to control when you’re walking around shooting on your mobile device. Here are three things to keep in mind when vlogging with your smartphone.

Part 1. Keep It Steady

For a nice, smooth, shot consider resting your hand up on a railing, table, or anything else that will keep it steady while you film. Camera shake is always distracting to viewers, and smartphone videos are notoriously unstable because you are almost always holding your phone in your hand.

There is equipment you can use to cut out camera shake. You can get a smartphone mount for your tripod, or you can even stabilize your phone using a selfie stick. Many of the very newest smartphones have built in hardware called ‘OIS’ – optical image stabilization – that helps reduce shakiness.

Part 2. Be Heard

You have a lot to say, so make sure people can hear you say it! Smartphones do not tend to have very good microphones built in (neither do most cameras), so try to vlog from somewhere without a lot of background noise. It will help a lot if your voice has nothing to compete with.

Ideally, you should get an external mic to record your voice while you vlog on your phone. There are shotgun mics you can plug directly into the audio jack on your phone which will record great audio, or you can get a high quality MP3 recorder and carry it around in your pocket.

Part 3. Tilt Your Phone

When recording on the spur of the moment with your smartphone it is easy to automatically hold it the same way you would while texting or taking a selfie. If you record a video with your phone held so that it is tall – a ‘portrait’ shot – then your video will have thick black bars on either side when you post it to YouTube. If you tilt your phone so that it is wide you will record a ‘landscape’ shot, which will match the dimensions YouTube plays videos in.

The exception to this is videos you plan to post on Instagram. On Instagram everything is cropped into a square, and it is easier to imagine what your footage will look like as a square when you hold your phone strait up. Simply focus on the top of your screen and treat a portion of the bottom of your screen as if it is not there. When you hold your phone horizontally you need to try and estimate how much of the middle of your screen will make it in to your Instagram video, which can be awkward.

Those are the three main things to keep in mind, but if you are planning on posting directly to YouTube from your phone then you should also make sure you have a mobile app you can use to edit it first.

Filmora is a full-feature video editing app available for both Android and iPhone operating systems. With Filmora you can make awesome YouTube videos quickly using Filmora’s one-touch themes, or take a little bit more time personalizing your creation. One-touch themes are sets of related features, like filters and animated titles, which you can apply to your videos all at once. Filmora’s simple interface also makes it easy to apply filters, titles, overlays, transitions, and even royalty free music to your project one at a time.

After you’ve edited your video in Filmora you can post it directly to YouTube or other social media sites right from the app.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read:

  • Title: "[New] Audio Clarity 10 Pro Tips for High-Quality Recordings"
  • Author: Steven
  • Created at : 2024-05-25 19:59:41
  • Updated at : 2024-05-26 19:59:41
  • Link: https://youtube-clips.techidaily.com/new-audio-clarity-10-pro-tips-for-high-quality-recordings/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
"[New] Audio Clarity 10 Pro Tips for High-Quality Recordings"