Acoustic Mastery: Secrets for Exceptional Audio Capture

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Swift Channels Growth: Optimizing Viewership with Collaborative Videos

YouTube Outros that Grow Your Channel Faster

Richard Bennett

Oct 26, 2023• Proven solutions

0

Your YouTube outro, or end screen , is your last chance to keep a viewer on your channel. There are a lot of videos in the ‘Related’ sidebar that might catch their attention, or they could decide to go back to their search results.

A good outro will prompt viewers to keep watching related content from you instead of from someone else, and it could even convince them to subscribe.

1. YouTube Outro Basics
2. YouTube Outro Templates
3. How to Use YouTube’s End Screen Feature
4. How YouTube Outros/End Screens Can Help You Grow on YouTube

Part 1: YouTube Outro Basics

From the video above we can see that it features video recommendations and a prominent subscribe button.

A YouTube end screen might have the following features:

Videos: you can embed links/thumbnails for videos you’ve made on similar topics in order to keep viewers watching your content.

Playlists: instead of (or in addition to) linking to individual videos, you can embed playlists and link viewers to all of your content on a particular topic.

Subscribe Button: prompt viewers to subscribe to your channel.

Background: you may choose to use all of the elements described above in combination with an end card consisting of a moving background or still image. You can even find templates that will have slots for all your thumbnails and buttons.

You may also want to include social icons and handles for your accounts on sites like Instagram or Twitter. These won’t be clickable (you’ll need to add them yourself outside of YouTube’s end screen tool), but they’ll still let viewers know where else they can find and follow you.

Part 2: YouTube Outro Templates Download

Here are 4 sites where you can download templates for YouTube Outros:

Tube Arsenal: this site has a good selection of customizable outros with moving backgrounds. On the Tube Arsenal site, before you download, you can adjust the colors and text included in your outro and even load in your own logo.

You can preview your customized outro by clicking Preview Still or Preview Movie.

Outros on Tube Arsenal cost $9 for 720P or $13 for 1080p.

Outro Maker: you can get animated end screens/outros from Outro Maker for $2.99 a month (or, if you just need one outro, you can probably finish it during your 7-day free trial).

Outro Maker uses the content already uploaded onto your channel to create your outro, so you will need to link the service with your channel.

Biteable: the templates you can customize on Biteable are not specifically designed to be YouTube Outros and will not have slots for your end screen elements. The videos start out a lot longer than you’ll want for an end screen (an end screen can’t last longer than 20 seconds), but you can shorten them by deleting all the ‘scenes’ you don’t need and keeping just the one or two you want.

The clips you can get from Biteable look great, and their process for changing the text and colors is simple and intuitive.

You can create 5 free projects every month with Biteable, but you’ll need to upgrade to their paid service to download them. It’s $30 for one month.

Velosofy: this site has a decent selection of templates you can download for free. However, the downloads are all project files for programs like Adobe Photoshop or After Effects. You’ll need to have the program that goes with your download in order to customize your outro.

You can also find free outro templates by searching for them on YouTube! Lots of people have created free outros to share with the YouTube community.

Besides downloading outro templates from the website, you can also create it with some outro makers or with the video editing software that you are using. Wondershare Filmora video editor is the video editor that I used often, it is featured some cool templates and preset for making an outro. I recommend you try it as well.

Part 3: How to Use YouTube’s End Screen Feature

Make sure to create a space at the end of your video for the elements of your end screen to sit on top of. Your end screen will not add to the length of your video, it will overlay onto the last 5-20 seconds.

Here’s how you add an End Screen:

1. Go to your YouTube Studio, then switch to Videos on the left menu;
2. Click Details next to the video you want to add an end screen to.
3. Click the End screen in the menu under the lower right window.
4. Click Element to start adding videos, playlists, and subscribe buttons to your outro. You could also choose to use the same layout as a previous end screen with Import From Video, or you could apply multiple elements at once with a YouTube Template.
5. Drag the elements to where you want them and adjust the timing using the timeline.
6. Click Save when you’re done.

Part 4: How YouTube Outros/End Screens Can Help You Grow on YouTube

One of the most important statistics for measuring the growth of Your YouTube channel is Watch Time. You need 4,000 hours of watch time (over the past 12 months) in order to qualify for monetization/the YouTube Partner Program, and watch time also plays an important role in how your videos are ranked in YouTube’s search results.

Watch time is more important than views. If you’re getting views, but people are only watching short sections of your video, YouTube’s algorithm thinks the people who are clicking on your videos don’t like them and ranks them lower.

Outros are one of the best ways of increasing the watch time for your channel, because the whole point of an outro is to convince viewers to stick around and watch more videos. Here are some best practices:

Link to related videos and playlists: if someone has watched one video on a topic to the end, they’ll likely be interested in another highly related video from you. For example, someone who’s watched a Let’s Play for God of War is more likely to be interested in another God of War video than your review of your new gaming headset.

Link to your newest video: YouTube’s algorithm places the most weight on the data it collects about your video within the first 24 hours of it being listed as Public. To give your newest video it’s the best chance at success, you should do everything you can to boost its watch time when it’s first posted and linking to it in the end screens of all your other videos is one way to do that.

You don’t have to change every screen individually, YouTube lets you link to your most recent video automatically.

Link to Playlists: if you can get a viewer watching a playlist of related videos then that’s great for your watch time. If they’re already in a playlist they’re far more likely to watch multiple videos than if they have to go to your channel page and hunt down the content they’re interested in.

Include a ‘CTA’ with your subscribe button: besides just including a button people can use to subscribe, you should ask them to click on it with a ‘Call to Action’ or CTA. This can mean writing something like ‘Subscribe for more videos!’ on your end card, or asking them in an outro voiceover. People are more likely to subscribe if you ask than if you don’t.

Are you using a YouTube outro? What elements do you include, and how do you think it’s helped the growth of your channel?

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Your YouTube outro, or end screen , is your last chance to keep a viewer on your channel. There are a lot of videos in the ‘Related’ sidebar that might catch their attention, or they could decide to go back to their search results.

A good outro will prompt viewers to keep watching related content from you instead of from someone else, and it could even convince them to subscribe.

1. YouTube Outro Basics
2. YouTube Outro Templates
3. How to Use YouTube’s End Screen Feature
4. How YouTube Outros/End Screens Can Help You Grow on YouTube

Part 1: YouTube Outro Basics

From the video above we can see that it features video recommendations and a prominent subscribe button.

A YouTube end screen might have the following features:

Videos: you can embed links/thumbnails for videos you’ve made on similar topics in order to keep viewers watching your content.

Playlists: instead of (or in addition to) linking to individual videos, you can embed playlists and link viewers to all of your content on a particular topic.

Subscribe Button: prompt viewers to subscribe to your channel.

Background: you may choose to use all of the elements described above in combination with an end card consisting of a moving background or still image. You can even find templates that will have slots for all your thumbnails and buttons.

You may also want to include social icons and handles for your accounts on sites like Instagram or Twitter. These won’t be clickable (you’ll need to add them yourself outside of YouTube’s end screen tool), but they’ll still let viewers know where else they can find and follow you.

Part 2: YouTube Outro Templates Download

Here are 4 sites where you can download templates for YouTube Outros:

Tube Arsenal: this site has a good selection of customizable outros with moving backgrounds. On the Tube Arsenal site, before you download, you can adjust the colors and text included in your outro and even load in your own logo.

You can preview your customized outro by clicking Preview Still or Preview Movie.

Outros on Tube Arsenal cost $9 for 720P or $13 for 1080p.

Outro Maker: you can get animated end screens/outros from Outro Maker for $2.99 a month (or, if you just need one outro, you can probably finish it during your 7-day free trial).

Outro Maker uses the content already uploaded onto your channel to create your outro, so you will need to link the service with your channel.

Biteable: the templates you can customize on Biteable are not specifically designed to be YouTube Outros and will not have slots for your end screen elements. The videos start out a lot longer than you’ll want for an end screen (an end screen can’t last longer than 20 seconds), but you can shorten them by deleting all the ‘scenes’ you don’t need and keeping just the one or two you want.

The clips you can get from Biteable look great, and their process for changing the text and colors is simple and intuitive.

You can create 5 free projects every month with Biteable, but you’ll need to upgrade to their paid service to download them. It’s $30 for one month.

Velosofy: this site has a decent selection of templates you can download for free. However, the downloads are all project files for programs like Adobe Photoshop or After Effects. You’ll need to have the program that goes with your download in order to customize your outro.

You can also find free outro templates by searching for them on YouTube! Lots of people have created free outros to share with the YouTube community.

Besides downloading outro templates from the website, you can also create it with some outro makers or with the video editing software that you are using. Wondershare Filmora video editor is the video editor that I used often, it is featured some cool templates and preset for making an outro. I recommend you try it as well.

Part 3: How to Use YouTube’s End Screen Feature

Make sure to create a space at the end of your video for the elements of your end screen to sit on top of. Your end screen will not add to the length of your video, it will overlay onto the last 5-20 seconds.

Here’s how you add an End Screen:

1. Go to your YouTube Studio, then switch to Videos on the left menu;
2. Click Details next to the video you want to add an end screen to.
3. Click the End screen in the menu under the lower right window.
4. Click Element to start adding videos, playlists, and subscribe buttons to your outro. You could also choose to use the same layout as a previous end screen with Import From Video, or you could apply multiple elements at once with a YouTube Template.
5. Drag the elements to where you want them and adjust the timing using the timeline.
6. Click Save when you’re done.

Part 4: How YouTube Outros/End Screens Can Help You Grow on YouTube

One of the most important statistics for measuring the growth of Your YouTube channel is Watch Time. You need 4,000 hours of watch time (over the past 12 months) in order to qualify for monetization/the YouTube Partner Program, and watch time also plays an important role in how your videos are ranked in YouTube’s search results.

Watch time is more important than views. If you’re getting views, but people are only watching short sections of your video, YouTube’s algorithm thinks the people who are clicking on your videos don’t like them and ranks them lower.

Outros are one of the best ways of increasing the watch time for your channel, because the whole point of an outro is to convince viewers to stick around and watch more videos. Here are some best practices:

Link to related videos and playlists: if someone has watched one video on a topic to the end, they’ll likely be interested in another highly related video from you. For example, someone who’s watched a Let’s Play for God of War is more likely to be interested in another God of War video than your review of your new gaming headset.

Link to your newest video: YouTube’s algorithm places the most weight on the data it collects about your video within the first 24 hours of it being listed as Public. To give your newest video it’s the best chance at success, you should do everything you can to boost its watch time when it’s first posted and linking to it in the end screens of all your other videos is one way to do that.

You don’t have to change every screen individually, YouTube lets you link to your most recent video automatically.

Link to Playlists: if you can get a viewer watching a playlist of related videos then that’s great for your watch time. If they’re already in a playlist they’re far more likely to watch multiple videos than if they have to go to your channel page and hunt down the content they’re interested in.

Include a ‘CTA’ with your subscribe button: besides just including a button people can use to subscribe, you should ask them to click on it with a ‘Call to Action’ or CTA. This can mean writing something like ‘Subscribe for more videos!’ on your end card, or asking them in an outro voiceover. People are more likely to subscribe if you ask than if you don’t.

Are you using a YouTube outro? What elements do you include, and how do you think it’s helped the growth of your channel?

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Your YouTube outro, or end screen , is your last chance to keep a viewer on your channel. There are a lot of videos in the ‘Related’ sidebar that might catch their attention, or they could decide to go back to their search results.

A good outro will prompt viewers to keep watching related content from you instead of from someone else, and it could even convince them to subscribe.

1. YouTube Outro Basics
2. YouTube Outro Templates
3. How to Use YouTube’s End Screen Feature
4. How YouTube Outros/End Screens Can Help You Grow on YouTube

Part 1: YouTube Outro Basics

From the video above we can see that it features video recommendations and a prominent subscribe button.

A YouTube end screen might have the following features:

Videos: you can embed links/thumbnails for videos you’ve made on similar topics in order to keep viewers watching your content.

Playlists: instead of (or in addition to) linking to individual videos, you can embed playlists and link viewers to all of your content on a particular topic.

Subscribe Button: prompt viewers to subscribe to your channel.

Background: you may choose to use all of the elements described above in combination with an end card consisting of a moving background or still image. You can even find templates that will have slots for all your thumbnails and buttons.

You may also want to include social icons and handles for your accounts on sites like Instagram or Twitter. These won’t be clickable (you’ll need to add them yourself outside of YouTube’s end screen tool), but they’ll still let viewers know where else they can find and follow you.

Part 2: YouTube Outro Templates Download

Here are 4 sites where you can download templates for YouTube Outros:

Tube Arsenal: this site has a good selection of customizable outros with moving backgrounds. On the Tube Arsenal site, before you download, you can adjust the colors and text included in your outro and even load in your own logo.

You can preview your customized outro by clicking Preview Still or Preview Movie.

Outros on Tube Arsenal cost $9 for 720P or $13 for 1080p.

Outro Maker: you can get animated end screens/outros from Outro Maker for $2.99 a month (or, if you just need one outro, you can probably finish it during your 7-day free trial).

Outro Maker uses the content already uploaded onto your channel to create your outro, so you will need to link the service with your channel.

Biteable: the templates you can customize on Biteable are not specifically designed to be YouTube Outros and will not have slots for your end screen elements. The videos start out a lot longer than you’ll want for an end screen (an end screen can’t last longer than 20 seconds), but you can shorten them by deleting all the ‘scenes’ you don’t need and keeping just the one or two you want.

The clips you can get from Biteable look great, and their process for changing the text and colors is simple and intuitive.

You can create 5 free projects every month with Biteable, but you’ll need to upgrade to their paid service to download them. It’s $30 for one month.

Velosofy: this site has a decent selection of templates you can download for free. However, the downloads are all project files for programs like Adobe Photoshop or After Effects. You’ll need to have the program that goes with your download in order to customize your outro.

You can also find free outro templates by searching for them on YouTube! Lots of people have created free outros to share with the YouTube community.

Besides downloading outro templates from the website, you can also create it with some outro makers or with the video editing software that you are using. Wondershare Filmora video editor is the video editor that I used often, it is featured some cool templates and preset for making an outro. I recommend you try it as well.

Part 3: How to Use YouTube’s End Screen Feature

Make sure to create a space at the end of your video for the elements of your end screen to sit on top of. Your end screen will not add to the length of your video, it will overlay onto the last 5-20 seconds.

Here’s how you add an End Screen:

1. Go to your YouTube Studio, then switch to Videos on the left menu;
2. Click Details next to the video you want to add an end screen to.
3. Click the End screen in the menu under the lower right window.
4. Click Element to start adding videos, playlists, and subscribe buttons to your outro. You could also choose to use the same layout as a previous end screen with Import From Video, or you could apply multiple elements at once with a YouTube Template.
5. Drag the elements to where you want them and adjust the timing using the timeline.
6. Click Save when you’re done.

Part 4: How YouTube Outros/End Screens Can Help You Grow on YouTube

One of the most important statistics for measuring the growth of Your YouTube channel is Watch Time. You need 4,000 hours of watch time (over the past 12 months) in order to qualify for monetization/the YouTube Partner Program, and watch time also plays an important role in how your videos are ranked in YouTube’s search results.

Watch time is more important than views. If you’re getting views, but people are only watching short sections of your video, YouTube’s algorithm thinks the people who are clicking on your videos don’t like them and ranks them lower.

Outros are one of the best ways of increasing the watch time for your channel, because the whole point of an outro is to convince viewers to stick around and watch more videos. Here are some best practices:

Link to related videos and playlists: if someone has watched one video on a topic to the end, they’ll likely be interested in another highly related video from you. For example, someone who’s watched a Let’s Play for God of War is more likely to be interested in another God of War video than your review of your new gaming headset.

Link to your newest video: YouTube’s algorithm places the most weight on the data it collects about your video within the first 24 hours of it being listed as Public. To give your newest video it’s the best chance at success, you should do everything you can to boost its watch time when it’s first posted and linking to it in the end screens of all your other videos is one way to do that.

You don’t have to change every screen individually, YouTube lets you link to your most recent video automatically.

Link to Playlists: if you can get a viewer watching a playlist of related videos then that’s great for your watch time. If they’re already in a playlist they’re far more likely to watch multiple videos than if they have to go to your channel page and hunt down the content they’re interested in.

Include a ‘CTA’ with your subscribe button: besides just including a button people can use to subscribe, you should ask them to click on it with a ‘Call to Action’ or CTA. This can mean writing something like ‘Subscribe for more videos!’ on your end card, or asking them in an outro voiceover. People are more likely to subscribe if you ask than if you don’t.

Are you using a YouTube outro? What elements do you include, and how do you think it’s helped the growth of your channel?

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Your YouTube outro, or end screen , is your last chance to keep a viewer on your channel. There are a lot of videos in the ‘Related’ sidebar that might catch their attention, or they could decide to go back to their search results.

A good outro will prompt viewers to keep watching related content from you instead of from someone else, and it could even convince them to subscribe.

1. YouTube Outro Basics
2. YouTube Outro Templates
3. How to Use YouTube’s End Screen Feature
4. How YouTube Outros/End Screens Can Help You Grow on YouTube

Part 1: YouTube Outro Basics

From the video above we can see that it features video recommendations and a prominent subscribe button.

A YouTube end screen might have the following features:

Videos: you can embed links/thumbnails for videos you’ve made on similar topics in order to keep viewers watching your content.

Playlists: instead of (or in addition to) linking to individual videos, you can embed playlists and link viewers to all of your content on a particular topic.

Subscribe Button: prompt viewers to subscribe to your channel.

Background: you may choose to use all of the elements described above in combination with an end card consisting of a moving background or still image. You can even find templates that will have slots for all your thumbnails and buttons.

You may also want to include social icons and handles for your accounts on sites like Instagram or Twitter. These won’t be clickable (you’ll need to add them yourself outside of YouTube’s end screen tool), but they’ll still let viewers know where else they can find and follow you.

Part 2: YouTube Outro Templates Download

Here are 4 sites where you can download templates for YouTube Outros:

Tube Arsenal: this site has a good selection of customizable outros with moving backgrounds. On the Tube Arsenal site, before you download, you can adjust the colors and text included in your outro and even load in your own logo.

You can preview your customized outro by clicking Preview Still or Preview Movie.

Outros on Tube Arsenal cost $9 for 720P or $13 for 1080p.

Outro Maker: you can get animated end screens/outros from Outro Maker for $2.99 a month (or, if you just need one outro, you can probably finish it during your 7-day free trial).

Outro Maker uses the content already uploaded onto your channel to create your outro, so you will need to link the service with your channel.

Biteable: the templates you can customize on Biteable are not specifically designed to be YouTube Outros and will not have slots for your end screen elements. The videos start out a lot longer than you’ll want for an end screen (an end screen can’t last longer than 20 seconds), but you can shorten them by deleting all the ‘scenes’ you don’t need and keeping just the one or two you want.

The clips you can get from Biteable look great, and their process for changing the text and colors is simple and intuitive.

You can create 5 free projects every month with Biteable, but you’ll need to upgrade to their paid service to download them. It’s $30 for one month.

Velosofy: this site has a decent selection of templates you can download for free. However, the downloads are all project files for programs like Adobe Photoshop or After Effects. You’ll need to have the program that goes with your download in order to customize your outro.

You can also find free outro templates by searching for them on YouTube! Lots of people have created free outros to share with the YouTube community.

Besides downloading outro templates from the website, you can also create it with some outro makers or with the video editing software that you are using. Wondershare Filmora video editor is the video editor that I used often, it is featured some cool templates and preset for making an outro. I recommend you try it as well.

Part 3: How to Use YouTube’s End Screen Feature

Make sure to create a space at the end of your video for the elements of your end screen to sit on top of. Your end screen will not add to the length of your video, it will overlay onto the last 5-20 seconds.

Here’s how you add an End Screen:

1. Go to your YouTube Studio, then switch to Videos on the left menu;
2. Click Details next to the video you want to add an end screen to.
3. Click the End screen in the menu under the lower right window.
4. Click Element to start adding videos, playlists, and subscribe buttons to your outro. You could also choose to use the same layout as a previous end screen with Import From Video, or you could apply multiple elements at once with a YouTube Template.
5. Drag the elements to where you want them and adjust the timing using the timeline.
6. Click Save when you’re done.

Part 4: How YouTube Outros/End Screens Can Help You Grow on YouTube

One of the most important statistics for measuring the growth of Your YouTube channel is Watch Time. You need 4,000 hours of watch time (over the past 12 months) in order to qualify for monetization/the YouTube Partner Program, and watch time also plays an important role in how your videos are ranked in YouTube’s search results.

Watch time is more important than views. If you’re getting views, but people are only watching short sections of your video, YouTube’s algorithm thinks the people who are clicking on your videos don’t like them and ranks them lower.

Outros are one of the best ways of increasing the watch time for your channel, because the whole point of an outro is to convince viewers to stick around and watch more videos. Here are some best practices:

Link to related videos and playlists: if someone has watched one video on a topic to the end, they’ll likely be interested in another highly related video from you. For example, someone who’s watched a Let’s Play for God of War is more likely to be interested in another God of War video than your review of your new gaming headset.

Link to your newest video: YouTube’s algorithm places the most weight on the data it collects about your video within the first 24 hours of it being listed as Public. To give your newest video it’s the best chance at success, you should do everything you can to boost its watch time when it’s first posted and linking to it in the end screens of all your other videos is one way to do that.

You don’t have to change every screen individually, YouTube lets you link to your most recent video automatically.

Link to Playlists: if you can get a viewer watching a playlist of related videos then that’s great for your watch time. If they’re already in a playlist they’re far more likely to watch multiple videos than if they have to go to your channel page and hunt down the content they’re interested in.

Include a ‘CTA’ with your subscribe button: besides just including a button people can use to subscribe, you should ask them to click on it with a ‘Call to Action’ or CTA. This can mean writing something like ‘Subscribe for more videos!’ on your end card, or asking them in an outro voiceover. People are more likely to subscribe if you ask than if you don’t.

Are you using a YouTube outro? What elements do you include, and how do you think it’s helped the growth of your channel?

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read: