![[New] 10 YouTube Tips for Teachers](https://thmb.techidaily.com/e12562333e85045ab9221a99e913b83b793150ee785e5f59fee7c9f18bec3976.png)
[New] 10 YouTube Tips for Teachers
Teachers’ Handbook: Building a Successful YouTube Channel – 10 Must-Dos
10 YouTube Tips for Teachers
Richard Bennett
Mar 27, 2024• Proven solutions
YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:
- Give lessons and instructions when they are absent
- Have an efficient way of explaining touch concepts
- Trigger interesting and unique discussions amongst the students
- Archive all their work and make them easily accessible for present and future students
- Flip lessons
- Help the students in reviewing for upcoming exams
- Access potential students in other countries
- Find relevant clips and use them as complimentary materials
- Personalize feedback to students by sending them private videos on the channel.
These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.
Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
10 Tips for teachers creating a YouTube Channel
Below are some of the tips for teachers who aspire to create successful YouTube channels:
1. Understand how YouTube channel work
It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.
2. Define your content
It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.
3. Shoot your videos
If you decide to shoot the videos on your own, consider the following:
- Always shoot on landscape
- Ensure there is adequate light and keep the lighting consistent
- Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
- Avoid shakes and keep the shots relatively short
- Invest in a good camera and good microphone
4. Edit and upload the videos
After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.
5. Create a playlist
When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.
6. Block Video Ads
Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.
7. Add descriptions
Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.
8. Block comments
If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.
9. Add questions to the videos
You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.
10. Promote your channel
If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.
Conclusion
A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Mar 27, 2024• Proven solutions
YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:
- Give lessons and instructions when they are absent
- Have an efficient way of explaining touch concepts
- Trigger interesting and unique discussions amongst the students
- Archive all their work and make them easily accessible for present and future students
- Flip lessons
- Help the students in reviewing for upcoming exams
- Access potential students in other countries
- Find relevant clips and use them as complimentary materials
- Personalize feedback to students by sending them private videos on the channel.
These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.
Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
10 Tips for teachers creating a YouTube Channel
Below are some of the tips for teachers who aspire to create successful YouTube channels:
1. Understand how YouTube channel work
It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.
2. Define your content
It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.
3. Shoot your videos
If you decide to shoot the videos on your own, consider the following:
- Always shoot on landscape
- Ensure there is adequate light and keep the lighting consistent
- Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
- Avoid shakes and keep the shots relatively short
- Invest in a good camera and good microphone
4. Edit and upload the videos
After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.
5. Create a playlist
When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.
6. Block Video Ads
Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.
7. Add descriptions
Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.
8. Block comments
If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.
9. Add questions to the videos
You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.
10. Promote your channel
If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.
Conclusion
A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Mar 27, 2024• Proven solutions
YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:
- Give lessons and instructions when they are absent
- Have an efficient way of explaining touch concepts
- Trigger interesting and unique discussions amongst the students
- Archive all their work and make them easily accessible for present and future students
- Flip lessons
- Help the students in reviewing for upcoming exams
- Access potential students in other countries
- Find relevant clips and use them as complimentary materials
- Personalize feedback to students by sending them private videos on the channel.
These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.
Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
10 Tips for teachers creating a YouTube Channel
Below are some of the tips for teachers who aspire to create successful YouTube channels:
1. Understand how YouTube channel work
It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.
2. Define your content
It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.
3. Shoot your videos
If you decide to shoot the videos on your own, consider the following:
- Always shoot on landscape
- Ensure there is adequate light and keep the lighting consistent
- Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
- Avoid shakes and keep the shots relatively short
- Invest in a good camera and good microphone
4. Edit and upload the videos
After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.
5. Create a playlist
When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.
6. Block Video Ads
Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.
7. Add descriptions
Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.
8. Block comments
If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.
9. Add questions to the videos
You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.
10. Promote your channel
If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.
Conclusion
A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Mar 27, 2024• Proven solutions
YouTube is one such component of the internet which has made it possible for teachers to do their work at a level of convenience and efficiency that has never been seen before. As a matter of fact, it is now a necessity rather than a mere convenience for a teacher to start a YouTube channel. This is because both they and their students will benefit in immeasurable ways from the materials on those channels. For instance, when they start a YouTube channel, they will have access to the following benefits:
- Give lessons and instructions when they are absent
- Have an efficient way of explaining touch concepts
- Trigger interesting and unique discussions amongst the students
- Archive all their work and make them easily accessible for present and future students
- Flip lessons
- Help the students in reviewing for upcoming exams
- Access potential students in other countries
- Find relevant clips and use them as complimentary materials
- Personalize feedback to students by sending them private videos on the channel.
These are just some of the few benefits that teachers get when they create a YouTube channel. To the teachers who have never created a channel before, it might sound like a daunting task and so you are likely to get discouraged. However, you should not get discouraged, since included here are some of the tips a teacher can use to start a YouTube channel and reap the immense benefits they bring.
Before building your YouTube Channel, you need a good video editing software to edit your videos to make them attractive and be liked by your students. Wondershare Filmora is the very software that we hightly recommend. It is a video editor very easy to use while full of advanced features like green screen, PIP, audio editing and color correction. You can create a beautiful video within minutes.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
10 Tips for teachers creating a YouTube Channel
Below are some of the tips for teachers who aspire to create successful YouTube channels:
1. Understand how YouTube channel work
It is imperative for you to learn and understand the working of YouTube before you think about how to create a YouTube channel. Learn the basics of creating a channel, uploading and editing a video, how to find other related videos and other information that will make it easy for you to successfully create a channel.
2. Define your content
It is equally important to know what kind of content you will upload when you create a YouTube channel. Ideally, the channel should not be a jack of all trade, even if you teach multiple subjects. It should be dedicated either to a particular subject or topics to make it more relevant to your students. Also determine if you will shoot the videos or upload from other sources.
3. Shoot your videos
If you decide to shoot the videos on your own, consider the following:
- Always shoot on landscape
- Ensure there is adequate light and keep the lighting consistent
- Have a shot list, or a guide to show you how you will progress on recording the educational video. This can be compared to a lesson plan in traditional teaching
- Avoid shakes and keep the shots relatively short
- Invest in a good camera and good microphone
4. Edit and upload the videos
After you are done with the shooting, it is imperative to edit the video before finally uploading them to your YouTube channel. You can use Wondershare Fillmora for the editing.
5. Create a playlist
When you create YouTube channel, it is recommended that you have a playlist to guide your students to the right categories and so that it becomes easier for them to find the content they are searching for.
6. Block Video Ads
Be sure to block video ads from your channel because they can be irritating and annoying and they will likely distract the attention of your viewers.
7. Add descriptions
Descriptions will enable your students to know what the video is all about in a glance and without going through the whole content.
8. Block comments
If you allow comments when you create a YouTube Channel, you may receive a lot of spam comments and sometimes the channel will be better off with the comments blocked.
9. Add questions to the videos
You need to include questions on the videos to keep the viewers attentive and have them hooked until the end of the videos.
10. Promote your channel
If you want more people to know your channel and gain more popularity, you can consider promoting your channel through various methods such as the social media and YouTube ads amongst others.
Conclusion
A YouTube channels has become one of the teaching tools teachers all around the world are adding to their arsenal. The channels make it easier and more convenient for teachers to pass knowledge to students in ways that were never possible in the past. It is thus the desire of every teacher to create a YouTube channel to make their work easier. The tips provided above will help the teachers start YouTube channels in the right manner and set them up for success from the word go.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Silencing Distractions: Enhancing YouTube Videos
How To Remove Background Noise from Your Youtube Video
Richard Bennett
Mar 27, 2024• Proven solutions
There are few things more annoying to viewers on YouTube than background noise. It is distracting and makes it difficult to engage with the content of a video. If there is noticeable background noise in a video, even a small noise like the faint hum of a computer fan, then it will increase the chances of viewers clicking away. The good news is that these kinds of noises are fairly easy to get rid of.
In order to remove background noise from your video clip, you will first need to create an MP3 of your audio. Then you will be able to take out the unwanted noise in a free program called Audacity and reintroduce your corrected audio into your Filmora project. This article will walk you through the audio editing process.
How To Remove Background Noise from Your Youtube Video
Background Noise Removal
Open up Filmora, import your clip, and drag it into the timeline. Then, play your clip and listen for background noise. If you hear a noise that you wish to remove move on to the first step of background noise removal .
1. Creating An MP3
If you do not already have it you will need to download VLC Media Player from videoLAN.org. VLC is a completely free media player that can play almost any type of file, is great for converting files, and can even be used as a screen recorder. If you consume a lot of media online then chances are you already have VLC. You could also use is Free Video to MP3 Converter by DVDVideoSoft.
If you choose to use VLC, open it up and select Convert/Save under Media. Select your video in the Open Media window that pops up. After you click Convert/Save you will be able to choose your format, in this case, MP3, under Save as type.
2. Removing Background Noise in Audacity
You can download Audacity for free at Audacityteam.org.
Once you have Audacity use it to open your MP3. Then, find a section of your audio that is silent aside from your background noise and highlight it by clicking and dragging. The idea is to point out to the program exactly what sound is a problem for you so it knows what to remove. If you have trouble finding a significant stretch of background noise that does not also include dialogue remember to record a pause before or after the content of your video next time you film.
With your section of background noise highlighted, go to Effect and then Noise Reduction. Then, click on Get Noise Profile. After that, you will select your entire audio timeline before going back to Noise Reduction under Effect. This time click on OK (the default settings are the best in most situations so you do not need to worry about changing them).
Audacity will remove everything that sounds like the sound profile, eliminating your background noise. Sometimes this method will also dull your dialogue, which can be fixed by selecting your entire track and then going to Effect and Amplify. Increasing amplification will fix any muffling of your audio.
3. Syncing in Filmora
Export your corrected MP3 from Audacity and import it into Filmora. Then, drag it into your music track. Syncing your audio should not be difficult, but you can always use your original audio to help you line it up properly if you need to. Just look for a significant spike in your audio waves in both your MP3 and the original audio and make sure they are right on top of each other.
Then, since you no longer need your original audio, you can delete it. Right-click on your clip and select Audio Detach. Once your audio is on its own track just select it and click delete.
Covering Background Noise
Sometimes background noise is so minor that you do not want to bother going through the process of removing it. In these situations, it may be easier to cover up your background noise than to remove it. This is as simple as dragging a song into the music track of your timeline and adjusting its volume so it is not loud enough to draw attention away from your dialogue. Chances are you want to add background music anyways and this is not even an extra step.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Mar 27, 2024• Proven solutions
There are few things more annoying to viewers on YouTube than background noise. It is distracting and makes it difficult to engage with the content of a video. If there is noticeable background noise in a video, even a small noise like the faint hum of a computer fan, then it will increase the chances of viewers clicking away. The good news is that these kinds of noises are fairly easy to get rid of.
In order to remove background noise from your video clip, you will first need to create an MP3 of your audio. Then you will be able to take out the unwanted noise in a free program called Audacity and reintroduce your corrected audio into your Filmora project. This article will walk you through the audio editing process.
How To Remove Background Noise from Your Youtube Video
Background Noise Removal
Open up Filmora, import your clip, and drag it into the timeline. Then, play your clip and listen for background noise. If you hear a noise that you wish to remove move on to the first step of background noise removal .
1. Creating An MP3
If you do not already have it you will need to download VLC Media Player from videoLAN.org. VLC is a completely free media player that can play almost any type of file, is great for converting files, and can even be used as a screen recorder. If you consume a lot of media online then chances are you already have VLC. You could also use is Free Video to MP3 Converter by DVDVideoSoft.
If you choose to use VLC, open it up and select Convert/Save under Media. Select your video in the Open Media window that pops up. After you click Convert/Save you will be able to choose your format, in this case, MP3, under Save as type.
2. Removing Background Noise in Audacity
You can download Audacity for free at Audacityteam.org.
Once you have Audacity use it to open your MP3. Then, find a section of your audio that is silent aside from your background noise and highlight it by clicking and dragging. The idea is to point out to the program exactly what sound is a problem for you so it knows what to remove. If you have trouble finding a significant stretch of background noise that does not also include dialogue remember to record a pause before or after the content of your video next time you film.
With your section of background noise highlighted, go to Effect and then Noise Reduction. Then, click on Get Noise Profile. After that, you will select your entire audio timeline before going back to Noise Reduction under Effect. This time click on OK (the default settings are the best in most situations so you do not need to worry about changing them).
Audacity will remove everything that sounds like the sound profile, eliminating your background noise. Sometimes this method will also dull your dialogue, which can be fixed by selecting your entire track and then going to Effect and Amplify. Increasing amplification will fix any muffling of your audio.
3. Syncing in Filmora
Export your corrected MP3 from Audacity and import it into Filmora. Then, drag it into your music track. Syncing your audio should not be difficult, but you can always use your original audio to help you line it up properly if you need to. Just look for a significant spike in your audio waves in both your MP3 and the original audio and make sure they are right on top of each other.
Then, since you no longer need your original audio, you can delete it. Right-click on your clip and select Audio Detach. Once your audio is on its own track just select it and click delete.
Covering Background Noise
Sometimes background noise is so minor that you do not want to bother going through the process of removing it. In these situations, it may be easier to cover up your background noise than to remove it. This is as simple as dragging a song into the music track of your timeline and adjusting its volume so it is not loud enough to draw attention away from your dialogue. Chances are you want to add background music anyways and this is not even an extra step.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Mar 27, 2024• Proven solutions
There are few things more annoying to viewers on YouTube than background noise. It is distracting and makes it difficult to engage with the content of a video. If there is noticeable background noise in a video, even a small noise like the faint hum of a computer fan, then it will increase the chances of viewers clicking away. The good news is that these kinds of noises are fairly easy to get rid of.
In order to remove background noise from your video clip, you will first need to create an MP3 of your audio. Then you will be able to take out the unwanted noise in a free program called Audacity and reintroduce your corrected audio into your Filmora project. This article will walk you through the audio editing process.
How To Remove Background Noise from Your Youtube Video
Background Noise Removal
Open up Filmora, import your clip, and drag it into the timeline. Then, play your clip and listen for background noise. If you hear a noise that you wish to remove move on to the first step of background noise removal .
1. Creating An MP3
If you do not already have it you will need to download VLC Media Player from videoLAN.org. VLC is a completely free media player that can play almost any type of file, is great for converting files, and can even be used as a screen recorder. If you consume a lot of media online then chances are you already have VLC. You could also use is Free Video to MP3 Converter by DVDVideoSoft.
If you choose to use VLC, open it up and select Convert/Save under Media. Select your video in the Open Media window that pops up. After you click Convert/Save you will be able to choose your format, in this case, MP3, under Save as type.
2. Removing Background Noise in Audacity
You can download Audacity for free at Audacityteam.org.
Once you have Audacity use it to open your MP3. Then, find a section of your audio that is silent aside from your background noise and highlight it by clicking and dragging. The idea is to point out to the program exactly what sound is a problem for you so it knows what to remove. If you have trouble finding a significant stretch of background noise that does not also include dialogue remember to record a pause before or after the content of your video next time you film.
With your section of background noise highlighted, go to Effect and then Noise Reduction. Then, click on Get Noise Profile. After that, you will select your entire audio timeline before going back to Noise Reduction under Effect. This time click on OK (the default settings are the best in most situations so you do not need to worry about changing them).
Audacity will remove everything that sounds like the sound profile, eliminating your background noise. Sometimes this method will also dull your dialogue, which can be fixed by selecting your entire track and then going to Effect and Amplify. Increasing amplification will fix any muffling of your audio.
3. Syncing in Filmora
Export your corrected MP3 from Audacity and import it into Filmora. Then, drag it into your music track. Syncing your audio should not be difficult, but you can always use your original audio to help you line it up properly if you need to. Just look for a significant spike in your audio waves in both your MP3 and the original audio and make sure they are right on top of each other.
Then, since you no longer need your original audio, you can delete it. Right-click on your clip and select Audio Detach. Once your audio is on its own track just select it and click delete.
Covering Background Noise
Sometimes background noise is so minor that you do not want to bother going through the process of removing it. In these situations, it may be easier to cover up your background noise than to remove it. This is as simple as dragging a song into the music track of your timeline and adjusting its volume so it is not loud enough to draw attention away from your dialogue. Chances are you want to add background music anyways and this is not even an extra step.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Mar 27, 2024• Proven solutions
There are few things more annoying to viewers on YouTube than background noise. It is distracting and makes it difficult to engage with the content of a video. If there is noticeable background noise in a video, even a small noise like the faint hum of a computer fan, then it will increase the chances of viewers clicking away. The good news is that these kinds of noises are fairly easy to get rid of.
In order to remove background noise from your video clip, you will first need to create an MP3 of your audio. Then you will be able to take out the unwanted noise in a free program called Audacity and reintroduce your corrected audio into your Filmora project. This article will walk you through the audio editing process.
How To Remove Background Noise from Your Youtube Video
Background Noise Removal
Open up Filmora, import your clip, and drag it into the timeline. Then, play your clip and listen for background noise. If you hear a noise that you wish to remove move on to the first step of background noise removal .
1. Creating An MP3
If you do not already have it you will need to download VLC Media Player from videoLAN.org. VLC is a completely free media player that can play almost any type of file, is great for converting files, and can even be used as a screen recorder. If you consume a lot of media online then chances are you already have VLC. You could also use is Free Video to MP3 Converter by DVDVideoSoft.
If you choose to use VLC, open it up and select Convert/Save under Media. Select your video in the Open Media window that pops up. After you click Convert/Save you will be able to choose your format, in this case, MP3, under Save as type.
2. Removing Background Noise in Audacity
You can download Audacity for free at Audacityteam.org.
Once you have Audacity use it to open your MP3. Then, find a section of your audio that is silent aside from your background noise and highlight it by clicking and dragging. The idea is to point out to the program exactly what sound is a problem for you so it knows what to remove. If you have trouble finding a significant stretch of background noise that does not also include dialogue remember to record a pause before or after the content of your video next time you film.
With your section of background noise highlighted, go to Effect and then Noise Reduction. Then, click on Get Noise Profile. After that, you will select your entire audio timeline before going back to Noise Reduction under Effect. This time click on OK (the default settings are the best in most situations so you do not need to worry about changing them).
Audacity will remove everything that sounds like the sound profile, eliminating your background noise. Sometimes this method will also dull your dialogue, which can be fixed by selecting your entire track and then going to Effect and Amplify. Increasing amplification will fix any muffling of your audio.
3. Syncing in Filmora
Export your corrected MP3 from Audacity and import it into Filmora. Then, drag it into your music track. Syncing your audio should not be difficult, but you can always use your original audio to help you line it up properly if you need to. Just look for a significant spike in your audio waves in both your MP3 and the original audio and make sure they are right on top of each other.
Then, since you no longer need your original audio, you can delete it. Right-click on your clip and select Audio Detach. Once your audio is on its own track just select it and click delete.
Covering Background Noise
Sometimes background noise is so minor that you do not want to bother going through the process of removing it. In these situations, it may be easier to cover up your background noise than to remove it. This is as simple as dragging a song into the music track of your timeline and adjusting its volume so it is not loud enough to draw attention away from your dialogue. Chances are you want to add background music anyways and this is not even an extra step.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
- Title: [New] 10 YouTube Tips for Teachers
- Author: Steven
- Created at : 2024-09-14 17:03:47
- Updated at : 2024-09-16 18:48:17
- Link: https://youtube-clips.techidaily.com/new-10-youtube-tips-for-teachers/
- License: This work is licensed under CC BY-NC-SA 4.0.