"In 2024, Cutting Edge Capture  Tips for Professional Sound Recording"

"In 2024, Cutting Edge Capture Tips for Professional Sound Recording"

Steven Lv12

Cutting Edge Capture: Tips for Professional Sound Recording

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

Download Filmora9 Win Version Download Filmora9 Mac Version

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Standard YouTube License vs. Creative Commons

author avatar

Richard Bennett

Mar 27, 2024• Proven solutions

When it comes to YouTube copyright, you may have noticed a cc video on YouTube. While in this article, we will show you the differences between the YouTube standard license and the Creative Commons license.


Searching for an easy-to-use while powerful video editing software to make videos for your YouTube Channel? Here we recommend Wondershare Filmora

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also like: 8 Powerful YouTube Video Downloader for Android >>


What is Standard YouTube License?

A standard license is the permit from a competent authority to own or use of something. In terms of internet it is basically based on the permission of using, copying or distributing content that is available online. YouTube is a video sharing website with its own set of rules and regulations in accordance with its license policy.

When a user is uploading a video he has option license options that he can choose from. The first option is “standard YouTube License” which means that you grant the broadcasting rights to YouTube. This essentially means that your video can only be accessed from YouTube for watching purpose and cannot be reproduced or distributed in any other form without your consent. The second type of license is the “Creative Commons” .

In the below video you’ll learn how to set standard YouTube license and cc license:

What is the difference between “Standard YouTube License” and “Creative Commons”

The basic different is that, with a standard license no one can use your video to reproduce as his own work (without clearly marking the video of the original video). However in a standard licence the original video uploader has some right to say “no” to the re-use of his video because the meaning of the video changes altogether.

However, if you select the creative commons license while uploading then the author may use any portions of work of the original author. It is generally permitted to edit, recompile, change or alter the original work except few listed things. These include copyrights of original work and a clear mentioning that the work has been derived from an original source. Moreover, that the original author will not be held responsible for any damages caused by the derivative work. This is how the two licenses differ from each other.

3 Common questions for “YouTube standard license”?

  • Is it illegal for me to share Standard YouTube license video with my friends on Facebook?

It is perfectly alright to share YouTube licensed videos on Facebook or any social media because firstly if sharing was prohibited then probably there wouldn’t have been a share button plug in. Moreover, by clicking share or copy-pasting the URL you are just pointing to the video bearing its original author’s name and URL. Hence, it’s not illegal in any way.

  • Can media companies (such as TV show) feature my video without my permission?

Media companies are generally richly profitable organizations. Hence before using content they need to seek legal permission from the original author of the video. This is especially the case when the owner of the video has used the standard license. It is then mandatory for the media house to take permission from the original video owner who had uploaded the video in the first place.

  • Can I use the videos marked as “YouTube standard license” for a non-profit video?

For a YouTube standard licensed video there is hard and fast legal rule. The original author may claim his work as he has been given certain rights to do so. For a non-profit video yet again you might need to convince him on the fact that you haven’t been gaining anything from usage of his content. So it’s still recommendable to seek permission initially.

You’ll learn “how to legally use copyrighted music, games, and movies on YouTube” from below video:

Download Win VersionDownload Mac Version

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

When it comes to YouTube copyright, you may have noticed a cc video on YouTube. While in this article, we will show you the differences between the YouTube standard license and the Creative Commons license.


Searching for an easy-to-use while powerful video editing software to make videos for your YouTube Channel? Here we recommend Wondershare Filmora

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also like: 8 Powerful YouTube Video Downloader for Android >>


What is Standard YouTube License?

A standard license is the permit from a competent authority to own or use of something. In terms of internet it is basically based on the permission of using, copying or distributing content that is available online. YouTube is a video sharing website with its own set of rules and regulations in accordance with its license policy.

When a user is uploading a video he has option license options that he can choose from. The first option is “standard YouTube License” which means that you grant the broadcasting rights to YouTube. This essentially means that your video can only be accessed from YouTube for watching purpose and cannot be reproduced or distributed in any other form without your consent. The second type of license is the “Creative Commons” .

In the below video you’ll learn how to set standard YouTube license and cc license:

What is the difference between “Standard YouTube License” and “Creative Commons”

The basic different is that, with a standard license no one can use your video to reproduce as his own work (without clearly marking the video of the original video). However in a standard licence the original video uploader has some right to say “no” to the re-use of his video because the meaning of the video changes altogether.

However, if you select the creative commons license while uploading then the author may use any portions of work of the original author. It is generally permitted to edit, recompile, change or alter the original work except few listed things. These include copyrights of original work and a clear mentioning that the work has been derived from an original source. Moreover, that the original author will not be held responsible for any damages caused by the derivative work. This is how the two licenses differ from each other.

3 Common questions for “YouTube standard license”?

  • Is it illegal for me to share Standard YouTube license video with my friends on Facebook?

It is perfectly alright to share YouTube licensed videos on Facebook or any social media because firstly if sharing was prohibited then probably there wouldn’t have been a share button plug in. Moreover, by clicking share or copy-pasting the URL you are just pointing to the video bearing its original author’s name and URL. Hence, it’s not illegal in any way.

  • Can media companies (such as TV show) feature my video without my permission?

Media companies are generally richly profitable organizations. Hence before using content they need to seek legal permission from the original author of the video. This is especially the case when the owner of the video has used the standard license. It is then mandatory for the media house to take permission from the original video owner who had uploaded the video in the first place.

  • Can I use the videos marked as “YouTube standard license” for a non-profit video?

For a YouTube standard licensed video there is hard and fast legal rule. The original author may claim his work as he has been given certain rights to do so. For a non-profit video yet again you might need to convince him on the fact that you haven’t been gaining anything from usage of his content. So it’s still recommendable to seek permission initially.

You’ll learn “how to legally use copyrighted music, games, and movies on YouTube” from below video:

Download Win VersionDownload Mac Version

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

When it comes to YouTube copyright, you may have noticed a cc video on YouTube. While in this article, we will show you the differences between the YouTube standard license and the Creative Commons license.


Searching for an easy-to-use while powerful video editing software to make videos for your YouTube Channel? Here we recommend Wondershare Filmora

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also like: 8 Powerful YouTube Video Downloader for Android >>


What is Standard YouTube License?

A standard license is the permit from a competent authority to own or use of something. In terms of internet it is basically based on the permission of using, copying or distributing content that is available online. YouTube is a video sharing website with its own set of rules and regulations in accordance with its license policy.

When a user is uploading a video he has option license options that he can choose from. The first option is “standard YouTube License” which means that you grant the broadcasting rights to YouTube. This essentially means that your video can only be accessed from YouTube for watching purpose and cannot be reproduced or distributed in any other form without your consent. The second type of license is the “Creative Commons” .

In the below video you’ll learn how to set standard YouTube license and cc license:

What is the difference between “Standard YouTube License” and “Creative Commons”

The basic different is that, with a standard license no one can use your video to reproduce as his own work (without clearly marking the video of the original video). However in a standard licence the original video uploader has some right to say “no” to the re-use of his video because the meaning of the video changes altogether.

However, if you select the creative commons license while uploading then the author may use any portions of work of the original author. It is generally permitted to edit, recompile, change or alter the original work except few listed things. These include copyrights of original work and a clear mentioning that the work has been derived from an original source. Moreover, that the original author will not be held responsible for any damages caused by the derivative work. This is how the two licenses differ from each other.

3 Common questions for “YouTube standard license”?

  • Is it illegal for me to share Standard YouTube license video with my friends on Facebook?

It is perfectly alright to share YouTube licensed videos on Facebook or any social media because firstly if sharing was prohibited then probably there wouldn’t have been a share button plug in. Moreover, by clicking share or copy-pasting the URL you are just pointing to the video bearing its original author’s name and URL. Hence, it’s not illegal in any way.

  • Can media companies (such as TV show) feature my video without my permission?

Media companies are generally richly profitable organizations. Hence before using content they need to seek legal permission from the original author of the video. This is especially the case when the owner of the video has used the standard license. It is then mandatory for the media house to take permission from the original video owner who had uploaded the video in the first place.

  • Can I use the videos marked as “YouTube standard license” for a non-profit video?

For a YouTube standard licensed video there is hard and fast legal rule. The original author may claim his work as he has been given certain rights to do so. For a non-profit video yet again you might need to convince him on the fact that you haven’t been gaining anything from usage of his content. So it’s still recommendable to seek permission initially.

You’ll learn “how to legally use copyrighted music, games, and movies on YouTube” from below video:

Download Win VersionDownload Mac Version

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

When it comes to YouTube copyright, you may have noticed a cc video on YouTube. While in this article, we will show you the differences between the YouTube standard license and the Creative Commons license.


Searching for an easy-to-use while powerful video editing software to make videos for your YouTube Channel? Here we recommend Wondershare Filmora

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also like: 8 Powerful YouTube Video Downloader for Android >>


What is Standard YouTube License?

A standard license is the permit from a competent authority to own or use of something. In terms of internet it is basically based on the permission of using, copying or distributing content that is available online. YouTube is a video sharing website with its own set of rules and regulations in accordance with its license policy.

When a user is uploading a video he has option license options that he can choose from. The first option is “standard YouTube License” which means that you grant the broadcasting rights to YouTube. This essentially means that your video can only be accessed from YouTube for watching purpose and cannot be reproduced or distributed in any other form without your consent. The second type of license is the “Creative Commons” .

In the below video you’ll learn how to set standard YouTube license and cc license:

What is the difference between “Standard YouTube License” and “Creative Commons”

The basic different is that, with a standard license no one can use your video to reproduce as his own work (without clearly marking the video of the original video). However in a standard licence the original video uploader has some right to say “no” to the re-use of his video because the meaning of the video changes altogether.

However, if you select the creative commons license while uploading then the author may use any portions of work of the original author. It is generally permitted to edit, recompile, change or alter the original work except few listed things. These include copyrights of original work and a clear mentioning that the work has been derived from an original source. Moreover, that the original author will not be held responsible for any damages caused by the derivative work. This is how the two licenses differ from each other.

3 Common questions for “YouTube standard license”?

  • Is it illegal for me to share Standard YouTube license video with my friends on Facebook?

It is perfectly alright to share YouTube licensed videos on Facebook or any social media because firstly if sharing was prohibited then probably there wouldn’t have been a share button plug in. Moreover, by clicking share or copy-pasting the URL you are just pointing to the video bearing its original author’s name and URL. Hence, it’s not illegal in any way.

  • Can media companies (such as TV show) feature my video without my permission?

Media companies are generally richly profitable organizations. Hence before using content they need to seek legal permission from the original author of the video. This is especially the case when the owner of the video has used the standard license. It is then mandatory for the media house to take permission from the original video owner who had uploaded the video in the first place.

  • Can I use the videos marked as “YouTube standard license” for a non-profit video?

For a YouTube standard licensed video there is hard and fast legal rule. The original author may claim his work as he has been given certain rights to do so. For a non-profit video yet again you might need to convince him on the fact that you haven’t been gaining anything from usage of his content. So it’s still recommendable to seek permission initially.

You’ll learn “how to legally use copyrighted music, games, and movies on YouTube” from below video:

Download Win VersionDownload Mac Version

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read:

  • Title: "In 2024, Cutting Edge Capture Tips for Professional Sound Recording"
  • Author: Steven
  • Created at : 2024-05-25 19:38:52
  • Updated at : 2024-05-26 19:38:52
  • Link: https://youtube-clips.techidaily.com/in-2024-cutting-edge-capture-tips-for-professional-sound-recording/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
"In 2024, Cutting Edge Capture Tips for Professional Sound Recording"