Can Instant Subscription Lead to Higher Watch Time?

YouTube Sub4Sub: Does It Really Work?

Richard Bennett

Mar 27, 2024• Proven solutions

Sometimes YouTubers with smaller channels feel like their small subscriber counts are holding them back. There is some truth to this. When you have a higher number of subscribers it is easier to get even more. That is why some users try to use methods like Sub4Sub to improve their numbers.

Sub4Sub, or ‘sub for sub’, is the practice of subscribing to somebody else’s channel in exchange for them subscribing to yours. Whether Sub4Sub works is debatable, but it is fairly popular. YouTubers often send messages to other YouTubers asking if they would like to sub for sub, and there are even off-YouTube sites devoted to connecting YouTubers so they can subscribe to each other. A lot of vloggers do not believe in Sub4Sub, though. This is because they doubt whether subscribers gained this way actually help them get more views on their videos.

This article will explain the pros and cons of Sub4Sub.

Does YouTube Sub4Sub Work

1. Does Sub4Sub Work?

The technical answer is ‘yes’. You can get new subscribers quickly using sub for sub and it is in no way against YouTube’s rules. On the other hand, subscribers gained through sub for sub do not watch or share your videos. Users end up with more subscribers, but their channels do not truly grow.

2. Pros of Sub4Sub

A big part of doing well on YouTube is being engaged in your vlogging community. If a YouTuber with a similar topic to yours approaches you with a Sub4Sub request and you engage them in a conversation it could be the beginning of a great friendship. Beyond subscribing to each other you can share tips, comment on each other’s videos, and maybe even collaborate on a video someday.

Sub4Sub can also help some YouTubers with their confidence. It can be discouraging not to see any growth and being embarrassed over their low subscriber counts can result in vloggers deciding to hide that information. They may feel like their content is being judged badly by people who are not even watching their videos based on how few subscribers they have. Building up a higher number using Sub4Sub may allow some YouTubers to move past these concerns and get back to focusing on making good videos.

3. Cons of Sub4Sub

The reality is that if people are pre-judging your videos based on your stats it is not subscribers they are looking at so much as views. Sub4Sub helps you get subscribers, but in most cases those subscribers will never watch any of your videos. They will also never share them or tell their friends to watch them, the way subscribers gained organically will. So while your subscriber count goes up, your view count stays low.

The situation described in the Pros section, where you talk to each other and comment on each other’s videos, is rare. You are more likely to make friends with other YouTubers after you have already watched each other’s videos or after chatting in a forum. It is worth trying to engage a vlogger with a similar topic to yours if they ask you to sub for sub, but most people who ask will have no intention of interacting with you beyond subscribing to each other. Realistically if you are going to use sub for sub to increase your subscriber count by any significant number you will not have time to have actual conversations with everyone you approach, or to watch their videos.

When you agree to exchange subscriptions with somebody there is also the danger that they will decide to unsubscribe from your channel afterwards. This could happen much later when they realize they do not want to be subscribed to so many people and have forgotten which channels were parts of Sub4Sub agreements. Or it could happen within weeks, days, or even hours of you subscribing to them. There are some dishonest YouTubers who use sub for sub to get subscribers while already planning to unsubscribe to anybody who agrees. Their hope is that the other person will not notice or will not bother unsubscribing from them if they do.

SwifDoo PDF 2-Year Plan

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

Sometimes YouTubers with smaller channels feel like their small subscriber counts are holding them back. There is some truth to this. When you have a higher number of subscribers it is easier to get even more. That is why some users try to use methods like Sub4Sub to improve their numbers.

Sub4Sub, or ‘sub for sub’, is the practice of subscribing to somebody else’s channel in exchange for them subscribing to yours. Whether Sub4Sub works is debatable, but it is fairly popular. YouTubers often send messages to other YouTubers asking if they would like to sub for sub, and there are even off-YouTube sites devoted to connecting YouTubers so they can subscribe to each other. A lot of vloggers do not believe in Sub4Sub, though. This is because they doubt whether subscribers gained this way actually help them get more views on their videos.

This article will explain the pros and cons of Sub4Sub.

Does YouTube Sub4Sub Work

1. Does Sub4Sub Work?

The technical answer is ‘yes’. You can get new subscribers quickly using sub for sub and it is in no way against YouTube’s rules. On the other hand, subscribers gained through sub for sub do not watch or share your videos. Users end up with more subscribers, but their channels do not truly grow.

2. Pros of Sub4Sub

A big part of doing well on YouTube is being engaged in your vlogging community. If a YouTuber with a similar topic to yours approaches you with a Sub4Sub request and you engage them in a conversation it could be the beginning of a great friendship. Beyond subscribing to each other you can share tips, comment on each other’s videos, and maybe even collaborate on a video someday.

Sub4Sub can also help some YouTubers with their confidence. It can be discouraging not to see any growth and being embarrassed over their low subscriber counts can result in vloggers deciding to hide that information. They may feel like their content is being judged badly by people who are not even watching their videos based on how few subscribers they have. Building up a higher number using Sub4Sub may allow some YouTubers to move past these concerns and get back to focusing on making good videos.

3. Cons of Sub4Sub

The reality is that if people are pre-judging your videos based on your stats it is not subscribers they are looking at so much as views. Sub4Sub helps you get subscribers, but in most cases those subscribers will never watch any of your videos. They will also never share them or tell their friends to watch them, the way subscribers gained organically will. So while your subscriber count goes up, your view count stays low.

The situation described in the Pros section, where you talk to each other and comment on each other’s videos, is rare. You are more likely to make friends with other YouTubers after you have already watched each other’s videos or after chatting in a forum. It is worth trying to engage a vlogger with a similar topic to yours if they ask you to sub for sub, but most people who ask will have no intention of interacting with you beyond subscribing to each other. Realistically if you are going to use sub for sub to increase your subscriber count by any significant number you will not have time to have actual conversations with everyone you approach, or to watch their videos.

When you agree to exchange subscriptions with somebody there is also the danger that they will decide to unsubscribe from your channel afterwards. This could happen much later when they realize they do not want to be subscribed to so many people and have forgotten which channels were parts of Sub4Sub agreements. Or it could happen within weeks, days, or even hours of you subscribing to them. There are some dishonest YouTubers who use sub for sub to get subscribers while already planning to unsubscribe to anybody who agrees. Their hope is that the other person will not notice or will not bother unsubscribing from them if they do.

Lyric Video Creator Professional Version

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

Sometimes YouTubers with smaller channels feel like their small subscriber counts are holding them back. There is some truth to this. When you have a higher number of subscribers it is easier to get even more. That is why some users try to use methods like Sub4Sub to improve their numbers.

Sub4Sub, or ‘sub for sub’, is the practice of subscribing to somebody else’s channel in exchange for them subscribing to yours. Whether Sub4Sub works is debatable, but it is fairly popular. YouTubers often send messages to other YouTubers asking if they would like to sub for sub, and there are even off-YouTube sites devoted to connecting YouTubers so they can subscribe to each other. A lot of vloggers do not believe in Sub4Sub, though. This is because they doubt whether subscribers gained this way actually help them get more views on their videos.

This article will explain the pros and cons of Sub4Sub.

Does YouTube Sub4Sub Work

1. Does Sub4Sub Work?

The technical answer is ‘yes’. You can get new subscribers quickly using sub for sub and it is in no way against YouTube’s rules. On the other hand, subscribers gained through sub for sub do not watch or share your videos. Users end up with more subscribers, but their channels do not truly grow.

2. Pros of Sub4Sub

A big part of doing well on YouTube is being engaged in your vlogging community. If a YouTuber with a similar topic to yours approaches you with a Sub4Sub request and you engage them in a conversation it could be the beginning of a great friendship. Beyond subscribing to each other you can share tips, comment on each other’s videos, and maybe even collaborate on a video someday.

Sub4Sub can also help some YouTubers with their confidence. It can be discouraging not to see any growth and being embarrassed over their low subscriber counts can result in vloggers deciding to hide that information. They may feel like their content is being judged badly by people who are not even watching their videos based on how few subscribers they have. Building up a higher number using Sub4Sub may allow some YouTubers to move past these concerns and get back to focusing on making good videos.

3. Cons of Sub4Sub

The reality is that if people are pre-judging your videos based on your stats it is not subscribers they are looking at so much as views. Sub4Sub helps you get subscribers, but in most cases those subscribers will never watch any of your videos. They will also never share them or tell their friends to watch them, the way subscribers gained organically will. So while your subscriber count goes up, your view count stays low.

The situation described in the Pros section, where you talk to each other and comment on each other’s videos, is rare. You are more likely to make friends with other YouTubers after you have already watched each other’s videos or after chatting in a forum. It is worth trying to engage a vlogger with a similar topic to yours if they ask you to sub for sub, but most people who ask will have no intention of interacting with you beyond subscribing to each other. Realistically if you are going to use sub for sub to increase your subscriber count by any significant number you will not have time to have actual conversations with everyone you approach, or to watch their videos.

When you agree to exchange subscriptions with somebody there is also the danger that they will decide to unsubscribe from your channel afterwards. This could happen much later when they realize they do not want to be subscribed to so many people and have forgotten which channels were parts of Sub4Sub agreements. Or it could happen within weeks, days, or even hours of you subscribing to them. There are some dishonest YouTubers who use sub for sub to get subscribers while already planning to unsubscribe to anybody who agrees. Their hope is that the other person will not notice or will not bother unsubscribing from them if they do.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

Sometimes YouTubers with smaller channels feel like their small subscriber counts are holding them back. There is some truth to this. When you have a higher number of subscribers it is easier to get even more. That is why some users try to use methods like Sub4Sub to improve their numbers.

Sub4Sub, or ‘sub for sub’, is the practice of subscribing to somebody else’s channel in exchange for them subscribing to yours. Whether Sub4Sub works is debatable, but it is fairly popular. YouTubers often send messages to other YouTubers asking if they would like to sub for sub, and there are even off-YouTube sites devoted to connecting YouTubers so they can subscribe to each other. A lot of vloggers do not believe in Sub4Sub, though. This is because they doubt whether subscribers gained this way actually help them get more views on their videos.

This article will explain the pros and cons of Sub4Sub.

Does YouTube Sub4Sub Work

1. Does Sub4Sub Work?

The technical answer is ‘yes’. You can get new subscribers quickly using sub for sub and it is in no way against YouTube’s rules. On the other hand, subscribers gained through sub for sub do not watch or share your videos. Users end up with more subscribers, but their channels do not truly grow.

2. Pros of Sub4Sub

A big part of doing well on YouTube is being engaged in your vlogging community. If a YouTuber with a similar topic to yours approaches you with a Sub4Sub request and you engage them in a conversation it could be the beginning of a great friendship. Beyond subscribing to each other you can share tips, comment on each other’s videos, and maybe even collaborate on a video someday.

Sub4Sub can also help some YouTubers with their confidence. It can be discouraging not to see any growth and being embarrassed over their low subscriber counts can result in vloggers deciding to hide that information. They may feel like their content is being judged badly by people who are not even watching their videos based on how few subscribers they have. Building up a higher number using Sub4Sub may allow some YouTubers to move past these concerns and get back to focusing on making good videos.

3. Cons of Sub4Sub

The reality is that if people are pre-judging your videos based on your stats it is not subscribers they are looking at so much as views. Sub4Sub helps you get subscribers, but in most cases those subscribers will never watch any of your videos. They will also never share them or tell their friends to watch them, the way subscribers gained organically will. So while your subscriber count goes up, your view count stays low.

The situation described in the Pros section, where you talk to each other and comment on each other’s videos, is rare. You are more likely to make friends with other YouTubers after you have already watched each other’s videos or after chatting in a forum. It is worth trying to engage a vlogger with a similar topic to yours if they ask you to sub for sub, but most people who ask will have no intention of interacting with you beyond subscribing to each other. Realistically if you are going to use sub for sub to increase your subscriber count by any significant number you will not have time to have actual conversations with everyone you approach, or to watch their videos.

When you agree to exchange subscriptions with somebody there is also the danger that they will decide to unsubscribe from your channel afterwards. This could happen much later when they realize they do not want to be subscribed to so many people and have forgotten which channels were parts of Sub4Sub agreements. Or it could happen within weeks, days, or even hours of you subscribing to them. There are some dishonest YouTubers who use sub for sub to get subscribers while already planning to unsubscribe to anybody who agrees. Their hope is that the other person will not notice or will not bother unsubscribing from them if they do.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Easy and Safe Partition Software & Hard Disk Manager

10 Recording Tips for Recording Audio with High Quality

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

DLNow Video Downloader

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

Forex Robotron Basic Package

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

vMix Pro - Software based live production. vMix Pro includes everything in vMix 4K plus 8 channels of Replay and 8 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

SwifDoo PDF Perpetual (2-PC) Free upgrade. No monthly fees ever.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

Glary Utilities PRO - Premium all-in-one utility to clean, speed up, maintain and protect your PC

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

### **5\. Upgrade your microphone**

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett