Boost Your Mobile Film Game: Best 9 Camera Add-Ons For Vloggers

Smartphone Camera Accessories Vloggers Should Try to Improve Recording

Richard Bennett

Oct 26, 2023• Proven solutions

0

As smartphone camera technology is rapidly advancing, more and more people are using smartphones as their primary vlogging device. They’re convenient and they draw the least amount of attention. But since most smartphones weren’t made specifically for vlogging, there’s a lot of room to make them more suitable for that purpose. Here is a list of the nine best smartphone camera accessories for vloggers.

Table of Contents 1. PORTABLE CHARGER2. TRIPOD MOUNT3. ANTI-GRAVITY CASE4. SELFIE RING LIGHT5. DIRECTIONAL MICROPHONE6. LENS SET7. FILMMAKING RIG8. FILMMAKING RIG9. GIMBAL

1. RAVPower Portable Charger

Vlogging uses a lot more power. If you’re planning to vlog all throughout your day with your phone, you need a portable way to charge it back up. RAVPower has a great line up of portable chargers with multiple USB inputs that hold a total charge of more than 20,000 mAh. With that amount, you can fully charge your smartphone more than 6 times! I own one myself and it’s been great for me during my travels. A 22,000 mAh charger goes for about $42 USD.

2. Arkon Tripod Mount

The Arkon tripod mount is a great portable tripod option that you can get at the fair price of around $20 USD. Not only does it have bendable legs, like the more expensive Joby GorillaPod tripod, that you can wrap around all kinds of structures, but it also comes with the smartphone mount, which Joby sells separately. Another great thing about the Arkon tripod is that its smartphone mount can be rotated so that you can position your phone to film in either widescreen or portrait mode.

3. Mega Tiny Anti-Gravity Case

For all the flat surfaces that the bendable legs of the Arkon tripod mount can’t wrap around, Mega Tiny’s anti-gravity cases will do the job of holding your iPhone or Android phone in one fixed position. These cases can stick to glass, mirrors, metal, and more. They range from $20 to $30 USD.

4. FLII Selfie Ring Light

As much as smartphone camera technology has advanced, phone cameras still underperform when it comes to filming video in low-light. In low-light, your footage is very grainy because your phone is equipped with a small camera sensor, an engineering choice by the manufacturers to keep the size of the phone small. A handy accessory that you can use to get more light is the FLII selfie ring light. This ring light clamps onto your phone and emits a neutral white light. You can clamp this light to either side of your phone, depending on whether you want to use your rear-facing camera or your front-facing camera. This selfie ring light sells for around $16 USD.

5. RODE VideoMic Me

The mic that is already built into your phone is equally sensitive to the sounds that come from behind the phone as it is to the sounds that are in front of the phone. This can be problematic when you’re trying to vlog in selfie mode while there’s a loud concert on the other side. One smartphone accessory that can improve the sound that you record from your phone in these situations is the RODE VideoMic Me. This mini directional shotgun mic plugs right into your phone’s headphone jack and sells for around $60 USD. In windy conditions, the dead cat windshield that it comes with does a great job of minimizing noise from the wind. In quiet, indoor conditions where you are the only person speaking, this device performs no better than your phone’s internal microphone. Your phone will also have to be in airplane mode to prevent the Rode VideoMic Me from recording unwanted clicking noise caused by background processes performed by your phone. So you wouldn’t want to use this for livestreaming.

6. Aukey Optic 3-in-1 Smartphone Lens Set

Aukey makes a 3-in-1 lens set that you can clamp onto your smartphone so that you can vlog at different focal lengths. The 3-in-1 set comes with a wide-angle lens, a fisheye lens, and a macro lens. The clamp it comes with is long enough for these lenses to reach any camera on a smartphone, not just those of iPhones which are positioned close to the phone’s outer edge. To get the most out of these lenses, you’ll have to use them without your phone’s protective case on. Although you are free to use this lens set on either your phone’s rear-facing camera or front-facing camera, the metal housing of these lenses is likely to show up in your footage when you use them with your front-facing camera. So, instead of having your recorded image stretch to the ends of a 16:9 ratio rectangular frame, your recorded image will look as if it is contained inside a circle. This lens set sells for around $30 USD.

7. iOgrapher Go for Android and iPhone

There’s many more accessories that you can take advantage of if you don’t limit yourself to just smartphone camera accessories. Sound and lighting equipment made for stand-alone cameras perform much better too. Many of these accessories are meant to connect to the camera “shoe” (a bracket on top of the camera that accessories can be attached to). Smartphones don’t come with these kinds of shoes. So, to take advantage of these higher quality accessories, you’ll need some kind of camera rig for your smartphone that also comes with shoes. The iOgrapher Go offers this at around $60 USD. This accessory comes with three shoes.

8. Manfrotto TwistGrip System

Manfrotto’s TwistGrip System does a similar job to the above iOgrapher Go. This system also comes with three shoes. An advantage the TwistGrip System has over the iOgrapher Go is that it is much more portable. Its three connected parts can be detached to take up less space in your bag. This system sells for around $50 USD.

9. Zhiyun Smooth-Q 3-Axis Handheld Gimbal Stabilizer for Smartphones

My favorite smartphone camera accessory that I own is the Zhiyun Smooth-Q gimbal stabilizer. This gimbal is very effective in helping you record smooth video. Using the app that it comes with, you can even preset this gimbal to smoothly pan and rotate from a starting position to an ending position, giving you the opportunity to film beautiful time lapses. You can get this device at around $100 USD.

Polish Your YouTube Videos with Filmora

As one of the most widely used video editing software in YouTube video editing, Filmora provides lots of templates and effects with an intuitive interface, which saves much time. Download the free trial version and get started now.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

As smartphone camera technology is rapidly advancing, more and more people are using smartphones as their primary vlogging device. They’re convenient and they draw the least amount of attention. But since most smartphones weren’t made specifically for vlogging, there’s a lot of room to make them more suitable for that purpose. Here is a list of the nine best smartphone camera accessories for vloggers.

Table of Contents 1. PORTABLE CHARGER2. TRIPOD MOUNT3. ANTI-GRAVITY CASE4. SELFIE RING LIGHT5. DIRECTIONAL MICROPHONE6. LENS SET7. FILMMAKING RIG8. FILMMAKING RIG9. GIMBAL

1. RAVPower Portable Charger

Vlogging uses a lot more power. If you’re planning to vlog all throughout your day with your phone, you need a portable way to charge it back up. RAVPower has a great line up of portable chargers with multiple USB inputs that hold a total charge of more than 20,000 mAh. With that amount, you can fully charge your smartphone more than 6 times! I own one myself and it’s been great for me during my travels. A 22,000 mAh charger goes for about $42 USD.

2. Arkon Tripod Mount

The Arkon tripod mount is a great portable tripod option that you can get at the fair price of around $20 USD. Not only does it have bendable legs, like the more expensive Joby GorillaPod tripod, that you can wrap around all kinds of structures, but it also comes with the smartphone mount, which Joby sells separately. Another great thing about the Arkon tripod is that its smartphone mount can be rotated so that you can position your phone to film in either widescreen or portrait mode.

3. Mega Tiny Anti-Gravity Case

For all the flat surfaces that the bendable legs of the Arkon tripod mount can’t wrap around, Mega Tiny’s anti-gravity cases will do the job of holding your iPhone or Android phone in one fixed position. These cases can stick to glass, mirrors, metal, and more. They range from $20 to $30 USD.

4. FLII Selfie Ring Light

As much as smartphone camera technology has advanced, phone cameras still underperform when it comes to filming video in low-light. In low-light, your footage is very grainy because your phone is equipped with a small camera sensor, an engineering choice by the manufacturers to keep the size of the phone small. A handy accessory that you can use to get more light is the FLII selfie ring light. This ring light clamps onto your phone and emits a neutral white light. You can clamp this light to either side of your phone, depending on whether you want to use your rear-facing camera or your front-facing camera. This selfie ring light sells for around $16 USD.

5. RODE VideoMic Me

The mic that is already built into your phone is equally sensitive to the sounds that come from behind the phone as it is to the sounds that are in front of the phone. This can be problematic when you’re trying to vlog in selfie mode while there’s a loud concert on the other side. One smartphone accessory that can improve the sound that you record from your phone in these situations is the RODE VideoMic Me. This mini directional shotgun mic plugs right into your phone’s headphone jack and sells for around $60 USD. In windy conditions, the dead cat windshield that it comes with does a great job of minimizing noise from the wind. In quiet, indoor conditions where you are the only person speaking, this device performs no better than your phone’s internal microphone. Your phone will also have to be in airplane mode to prevent the Rode VideoMic Me from recording unwanted clicking noise caused by background processes performed by your phone. So you wouldn’t want to use this for livestreaming.

6. Aukey Optic 3-in-1 Smartphone Lens Set

Aukey makes a 3-in-1 lens set that you can clamp onto your smartphone so that you can vlog at different focal lengths. The 3-in-1 set comes with a wide-angle lens, a fisheye lens, and a macro lens. The clamp it comes with is long enough for these lenses to reach any camera on a smartphone, not just those of iPhones which are positioned close to the phone’s outer edge. To get the most out of these lenses, you’ll have to use them without your phone’s protective case on. Although you are free to use this lens set on either your phone’s rear-facing camera or front-facing camera, the metal housing of these lenses is likely to show up in your footage when you use them with your front-facing camera. So, instead of having your recorded image stretch to the ends of a 16:9 ratio rectangular frame, your recorded image will look as if it is contained inside a circle. This lens set sells for around $30 USD.

7. iOgrapher Go for Android and iPhone

There’s many more accessories that you can take advantage of if you don’t limit yourself to just smartphone camera accessories. Sound and lighting equipment made for stand-alone cameras perform much better too. Many of these accessories are meant to connect to the camera “shoe” (a bracket on top of the camera that accessories can be attached to). Smartphones don’t come with these kinds of shoes. So, to take advantage of these higher quality accessories, you’ll need some kind of camera rig for your smartphone that also comes with shoes. The iOgrapher Go offers this at around $60 USD. This accessory comes with three shoes.

8. Manfrotto TwistGrip System

Manfrotto’s TwistGrip System does a similar job to the above iOgrapher Go. This system also comes with three shoes. An advantage the TwistGrip System has over the iOgrapher Go is that it is much more portable. Its three connected parts can be detached to take up less space in your bag. This system sells for around $50 USD.

9. Zhiyun Smooth-Q 3-Axis Handheld Gimbal Stabilizer for Smartphones

My favorite smartphone camera accessory that I own is the Zhiyun Smooth-Q gimbal stabilizer. This gimbal is very effective in helping you record smooth video. Using the app that it comes with, you can even preset this gimbal to smoothly pan and rotate from a starting position to an ending position, giving you the opportunity to film beautiful time lapses. You can get this device at around $100 USD.

Polish Your YouTube Videos with Filmora

As one of the most widely used video editing software in YouTube video editing, Filmora provides lots of templates and effects with an intuitive interface, which saves much time. Download the free trial version and get started now.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

As smartphone camera technology is rapidly advancing, more and more people are using smartphones as their primary vlogging device. They’re convenient and they draw the least amount of attention. But since most smartphones weren’t made specifically for vlogging, there’s a lot of room to make them more suitable for that purpose. Here is a list of the nine best smartphone camera accessories for vloggers.

Table of Contents 1. PORTABLE CHARGER2. TRIPOD MOUNT3. ANTI-GRAVITY CASE4. SELFIE RING LIGHT5. DIRECTIONAL MICROPHONE6. LENS SET7. FILMMAKING RIG8. FILMMAKING RIG9. GIMBAL

1. RAVPower Portable Charger

Vlogging uses a lot more power. If you’re planning to vlog all throughout your day with your phone, you need a portable way to charge it back up. RAVPower has a great line up of portable chargers with multiple USB inputs that hold a total charge of more than 20,000 mAh. With that amount, you can fully charge your smartphone more than 6 times! I own one myself and it’s been great for me during my travels. A 22,000 mAh charger goes for about $42 USD.

2. Arkon Tripod Mount

The Arkon tripod mount is a great portable tripod option that you can get at the fair price of around $20 USD. Not only does it have bendable legs, like the more expensive Joby GorillaPod tripod, that you can wrap around all kinds of structures, but it also comes with the smartphone mount, which Joby sells separately. Another great thing about the Arkon tripod is that its smartphone mount can be rotated so that you can position your phone to film in either widescreen or portrait mode.

3. Mega Tiny Anti-Gravity Case

For all the flat surfaces that the bendable legs of the Arkon tripod mount can’t wrap around, Mega Tiny’s anti-gravity cases will do the job of holding your iPhone or Android phone in one fixed position. These cases can stick to glass, mirrors, metal, and more. They range from $20 to $30 USD.

4. FLII Selfie Ring Light

As much as smartphone camera technology has advanced, phone cameras still underperform when it comes to filming video in low-light. In low-light, your footage is very grainy because your phone is equipped with a small camera sensor, an engineering choice by the manufacturers to keep the size of the phone small. A handy accessory that you can use to get more light is the FLII selfie ring light. This ring light clamps onto your phone and emits a neutral white light. You can clamp this light to either side of your phone, depending on whether you want to use your rear-facing camera or your front-facing camera. This selfie ring light sells for around $16 USD.

5. RODE VideoMic Me

The mic that is already built into your phone is equally sensitive to the sounds that come from behind the phone as it is to the sounds that are in front of the phone. This can be problematic when you’re trying to vlog in selfie mode while there’s a loud concert on the other side. One smartphone accessory that can improve the sound that you record from your phone in these situations is the RODE VideoMic Me. This mini directional shotgun mic plugs right into your phone’s headphone jack and sells for around $60 USD. In windy conditions, the dead cat windshield that it comes with does a great job of minimizing noise from the wind. In quiet, indoor conditions where you are the only person speaking, this device performs no better than your phone’s internal microphone. Your phone will also have to be in airplane mode to prevent the Rode VideoMic Me from recording unwanted clicking noise caused by background processes performed by your phone. So you wouldn’t want to use this for livestreaming.

6. Aukey Optic 3-in-1 Smartphone Lens Set

Aukey makes a 3-in-1 lens set that you can clamp onto your smartphone so that you can vlog at different focal lengths. The 3-in-1 set comes with a wide-angle lens, a fisheye lens, and a macro lens. The clamp it comes with is long enough for these lenses to reach any camera on a smartphone, not just those of iPhones which are positioned close to the phone’s outer edge. To get the most out of these lenses, you’ll have to use them without your phone’s protective case on. Although you are free to use this lens set on either your phone’s rear-facing camera or front-facing camera, the metal housing of these lenses is likely to show up in your footage when you use them with your front-facing camera. So, instead of having your recorded image stretch to the ends of a 16:9 ratio rectangular frame, your recorded image will look as if it is contained inside a circle. This lens set sells for around $30 USD.

7. iOgrapher Go for Android and iPhone

There’s many more accessories that you can take advantage of if you don’t limit yourself to just smartphone camera accessories. Sound and lighting equipment made for stand-alone cameras perform much better too. Many of these accessories are meant to connect to the camera “shoe” (a bracket on top of the camera that accessories can be attached to). Smartphones don’t come with these kinds of shoes. So, to take advantage of these higher quality accessories, you’ll need some kind of camera rig for your smartphone that also comes with shoes. The iOgrapher Go offers this at around $60 USD. This accessory comes with three shoes.

8. Manfrotto TwistGrip System

Manfrotto’s TwistGrip System does a similar job to the above iOgrapher Go. This system also comes with three shoes. An advantage the TwistGrip System has over the iOgrapher Go is that it is much more portable. Its three connected parts can be detached to take up less space in your bag. This system sells for around $50 USD.

9. Zhiyun Smooth-Q 3-Axis Handheld Gimbal Stabilizer for Smartphones

My favorite smartphone camera accessory that I own is the Zhiyun Smooth-Q gimbal stabilizer. This gimbal is very effective in helping you record smooth video. Using the app that it comes with, you can even preset this gimbal to smoothly pan and rotate from a starting position to an ending position, giving you the opportunity to film beautiful time lapses. You can get this device at around $100 USD.

Polish Your YouTube Videos with Filmora

As one of the most widely used video editing software in YouTube video editing, Filmora provides lots of templates and effects with an intuitive interface, which saves much time. Download the free trial version and get started now.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

As smartphone camera technology is rapidly advancing, more and more people are using smartphones as their primary vlogging device. They’re convenient and they draw the least amount of attention. But since most smartphones weren’t made specifically for vlogging, there’s a lot of room to make them more suitable for that purpose. Here is a list of the nine best smartphone camera accessories for vloggers.

Table of Contents 1. PORTABLE CHARGER2. TRIPOD MOUNT3. ANTI-GRAVITY CASE4. SELFIE RING LIGHT5. DIRECTIONAL MICROPHONE6. LENS SET7. FILMMAKING RIG8. FILMMAKING RIG9. GIMBAL

1. RAVPower Portable Charger

Vlogging uses a lot more power. If you’re planning to vlog all throughout your day with your phone, you need a portable way to charge it back up. RAVPower has a great line up of portable chargers with multiple USB inputs that hold a total charge of more than 20,000 mAh. With that amount, you can fully charge your smartphone more than 6 times! I own one myself and it’s been great for me during my travels. A 22,000 mAh charger goes for about $42 USD.

2. Arkon Tripod Mount

The Arkon tripod mount is a great portable tripod option that you can get at the fair price of around $20 USD. Not only does it have bendable legs, like the more expensive Joby GorillaPod tripod, that you can wrap around all kinds of structures, but it also comes with the smartphone mount, which Joby sells separately. Another great thing about the Arkon tripod is that its smartphone mount can be rotated so that you can position your phone to film in either widescreen or portrait mode.

3. Mega Tiny Anti-Gravity Case

For all the flat surfaces that the bendable legs of the Arkon tripod mount can’t wrap around, Mega Tiny’s anti-gravity cases will do the job of holding your iPhone or Android phone in one fixed position. These cases can stick to glass, mirrors, metal, and more. They range from $20 to $30 USD.

4. FLII Selfie Ring Light

As much as smartphone camera technology has advanced, phone cameras still underperform when it comes to filming video in low-light. In low-light, your footage is very grainy because your phone is equipped with a small camera sensor, an engineering choice by the manufacturers to keep the size of the phone small. A handy accessory that you can use to get more light is the FLII selfie ring light. This ring light clamps onto your phone and emits a neutral white light. You can clamp this light to either side of your phone, depending on whether you want to use your rear-facing camera or your front-facing camera. This selfie ring light sells for around $16 USD.

5. RODE VideoMic Me

The mic that is already built into your phone is equally sensitive to the sounds that come from behind the phone as it is to the sounds that are in front of the phone. This can be problematic when you’re trying to vlog in selfie mode while there’s a loud concert on the other side. One smartphone accessory that can improve the sound that you record from your phone in these situations is the RODE VideoMic Me. This mini directional shotgun mic plugs right into your phone’s headphone jack and sells for around $60 USD. In windy conditions, the dead cat windshield that it comes with does a great job of minimizing noise from the wind. In quiet, indoor conditions where you are the only person speaking, this device performs no better than your phone’s internal microphone. Your phone will also have to be in airplane mode to prevent the Rode VideoMic Me from recording unwanted clicking noise caused by background processes performed by your phone. So you wouldn’t want to use this for livestreaming.

6. Aukey Optic 3-in-1 Smartphone Lens Set

Aukey makes a 3-in-1 lens set that you can clamp onto your smartphone so that you can vlog at different focal lengths. The 3-in-1 set comes with a wide-angle lens, a fisheye lens, and a macro lens. The clamp it comes with is long enough for these lenses to reach any camera on a smartphone, not just those of iPhones which are positioned close to the phone’s outer edge. To get the most out of these lenses, you’ll have to use them without your phone’s protective case on. Although you are free to use this lens set on either your phone’s rear-facing camera or front-facing camera, the metal housing of these lenses is likely to show up in your footage when you use them with your front-facing camera. So, instead of having your recorded image stretch to the ends of a 16:9 ratio rectangular frame, your recorded image will look as if it is contained inside a circle. This lens set sells for around $30 USD.

7. iOgrapher Go for Android and iPhone

There’s many more accessories that you can take advantage of if you don’t limit yourself to just smartphone camera accessories. Sound and lighting equipment made for stand-alone cameras perform much better too. Many of these accessories are meant to connect to the camera “shoe” (a bracket on top of the camera that accessories can be attached to). Smartphones don’t come with these kinds of shoes. So, to take advantage of these higher quality accessories, you’ll need some kind of camera rig for your smartphone that also comes with shoes. The iOgrapher Go offers this at around $60 USD. This accessory comes with three shoes.

8. Manfrotto TwistGrip System

Manfrotto’s TwistGrip System does a similar job to the above iOgrapher Go. This system also comes with three shoes. An advantage the TwistGrip System has over the iOgrapher Go is that it is much more portable. Its three connected parts can be detached to take up less space in your bag. This system sells for around $50 USD.

9. Zhiyun Smooth-Q 3-Axis Handheld Gimbal Stabilizer for Smartphones

My favorite smartphone camera accessory that I own is the Zhiyun Smooth-Q gimbal stabilizer. This gimbal is very effective in helping you record smooth video. Using the app that it comes with, you can even preset this gimbal to smoothly pan and rotate from a starting position to an ending position, giving you the opportunity to film beautiful time lapses. You can get this device at around $100 USD.

Polish Your YouTube Videos with Filmora

As one of the most widely used video editing software in YouTube video editing, Filmora provides lots of templates and effects with an intuitive interface, which saves much time. Download the free trial version and get started now.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Counteract Vibration for Clear Captures

DIY Tripods| How to Stabilize Your Camera without Buying a Tripod

Richard Bennett

Oct 26, 2023• Proven solutions

0

When you’re trying to grow a channel on YouTube it can feel like equipment is a barrier, but it shouldn’t be. If you can’t afford a high-end tripod, for example, there are loads of ways to get by without one.

DIY Your Video with Wondershare Filmora

Wondershare Filmora has the best video stabilization tool is your videos have a bad frame or were recorded in dim lights. If a video is shot in bad weather or unfriendly situation where you don’t have all the equipment required for a quality recording, Wondershare Filmora can help you in the background to edit your videos like a pro. And it has all the relevant tools like effects, transitions, background removal, overlays, and background music that could turn your normal video to a professional one.

Here are 3 of our favorite DIY tripods.

DIY smartphone tripod using binder clips or hair clips

You’re a solo operation and your best camera is on your phone. That’s pretty common.

If you have a DSLR then you can set it down on any stable surface while filming yourself, but your phone can’t stand up by itself. It needs something or someone to hold it. Do you just accept that and shoot everything as a selfie?

No. No, you don’t, because there are common household items that can help you out of this problem. For this DIY tripod, you need either 2 binder clips or 2 ‘claw clips’ (also called ‘hair jaws’).

Hold your phone in landscape mode (horizontally, so it’s long rather than tall) and attach clips to the bottom corners. If you are worried about scratching your screen, fold up some paper to place between your clip and your phone.

Here it is with binder clips:

And here it is with hair clips:

Now you can set your smartphone upon any stable surface, like a table or a stack of books.

Here are some more cool ideas!

DIY adjustable tripod using books and a towel

You’ve probably heard a million times that you can stabilize your camera by sitting it down on any stable surface – on your desk, on a stack of books, up in a tree, etc. This is very true!

But if you can use any stable surface, why do people buy tripods?

Because it isn’t convenient to rearrange your furniture whenever you want to make a video, and also because tripods are adjustable. You can change their height, you can use them to pan or tilt, and it’s pretty easy to move them a bit forwards or backward while you’re setting up your shot.

To get similar functions from the ‘any stable surface’ solution you can use a table, a stack of books, and a towel.

1. Set up the area where you’re going to sit while you’re filming on one end of the table.
2. Put the towel down over the approximate spot you want your camera to be.
3. Stack your books on top of the towel.
4. Put your camera on top of the books.

Now if your camera isn’t up high enough, or is too high, you can adjust it just by adding or taking away books. If you want to move it closer or farther away from you, just pull the towel forwards or backward.

DIY gripping ‘Gorillapod’ using wire and tape

Gorillapod’s are cool because you can use them like normal tripods, carry them around like selfie sticks, or attach them to things like fences and posts. Here’s how you can make something similar using wire, electrical tape or duct tape, and a 1/4 bolt.

Your wire should be fairly stiff and you’ll need three pieces the same length, which should be at least 10 inches. Old clothes hangers work well. This needs to be something strong enough to support the weight of your camera, but soft enough that it’s not impossible for you to bend.

All of your supplies plus the finished product.

Readying your legs

Step 1: Bend 2 inches at one end of each wire into a ‘U’ shape. You will probably need pliers for this.

Step 2: Pick up one of your pieces of wire and wrap one end with electrical tape. Go around 5-10 times (to prevent it from coming undone at the end) and then, without cutting your tape, start moving up and wrapping the rest of your wire. Stop before your ‘U’ section.

Repeat this with the other two wires.

Attaching your legs

Step 1: Place the ‘U’ section of a leg against your bolt. The bolt’s threading should be pointing away from the leg. Now, use your tape to attach them. Wind it around 2 or 3 times, then repeat the process with both of the other legs individually.

Step 2: After all the legs are attached, wrap some more tape around all 3 as tightly as you can.

Your camera will mount onto the bolt! You’ll be able to use this as a normal table-top tripod or use the flexible legs to grab onto different things like a Gorillapod. Read more at Instructables.

Note: make sure the bolt is a fit for your camera before you get too far into this process.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

When you’re trying to grow a channel on YouTube it can feel like equipment is a barrier, but it shouldn’t be. If you can’t afford a high-end tripod, for example, there are loads of ways to get by without one.

DIY Your Video with Wondershare Filmora

Wondershare Filmora has the best video stabilization tool is your videos have a bad frame or were recorded in dim lights. If a video is shot in bad weather or unfriendly situation where you don’t have all the equipment required for a quality recording, Wondershare Filmora can help you in the background to edit your videos like a pro. And it has all the relevant tools like effects, transitions, background removal, overlays, and background music that could turn your normal video to a professional one.

Here are 3 of our favorite DIY tripods.

DIY smartphone tripod using binder clips or hair clips

You’re a solo operation and your best camera is on your phone. That’s pretty common.

If you have a DSLR then you can set it down on any stable surface while filming yourself, but your phone can’t stand up by itself. It needs something or someone to hold it. Do you just accept that and shoot everything as a selfie?

No. No, you don’t, because there are common household items that can help you out of this problem. For this DIY tripod, you need either 2 binder clips or 2 ‘claw clips’ (also called ‘hair jaws’).

Hold your phone in landscape mode (horizontally, so it’s long rather than tall) and attach clips to the bottom corners. If you are worried about scratching your screen, fold up some paper to place between your clip and your phone.

Here it is with binder clips:

And here it is with hair clips:

Now you can set your smartphone upon any stable surface, like a table or a stack of books.

Here are some more cool ideas!

DIY adjustable tripod using books and a towel

You’ve probably heard a million times that you can stabilize your camera by sitting it down on any stable surface – on your desk, on a stack of books, up in a tree, etc. This is very true!

But if you can use any stable surface, why do people buy tripods?

Because it isn’t convenient to rearrange your furniture whenever you want to make a video, and also because tripods are adjustable. You can change their height, you can use them to pan or tilt, and it’s pretty easy to move them a bit forwards or backward while you’re setting up your shot.

To get similar functions from the ‘any stable surface’ solution you can use a table, a stack of books, and a towel.

1. Set up the area where you’re going to sit while you’re filming on one end of the table.
2. Put the towel down over the approximate spot you want your camera to be.
3. Stack your books on top of the towel.
4. Put your camera on top of the books.

Now if your camera isn’t up high enough, or is too high, you can adjust it just by adding or taking away books. If you want to move it closer or farther away from you, just pull the towel forwards or backward.

DIY gripping ‘Gorillapod’ using wire and tape

Gorillapod’s are cool because you can use them like normal tripods, carry them around like selfie sticks, or attach them to things like fences and posts. Here’s how you can make something similar using wire, electrical tape or duct tape, and a 1/4 bolt.

Your wire should be fairly stiff and you’ll need three pieces the same length, which should be at least 10 inches. Old clothes hangers work well. This needs to be something strong enough to support the weight of your camera, but soft enough that it’s not impossible for you to bend.

All of your supplies plus the finished product.

Readying your legs

Step 1: Bend 2 inches at one end of each wire into a ‘U’ shape. You will probably need pliers for this.

Step 2: Pick up one of your pieces of wire and wrap one end with electrical tape. Go around 5-10 times (to prevent it from coming undone at the end) and then, without cutting your tape, start moving up and wrapping the rest of your wire. Stop before your ‘U’ section.

Repeat this with the other two wires.

Attaching your legs

Step 1: Place the ‘U’ section of a leg against your bolt. The bolt’s threading should be pointing away from the leg. Now, use your tape to attach them. Wind it around 2 or 3 times, then repeat the process with both of the other legs individually.

Step 2: After all the legs are attached, wrap some more tape around all 3 as tightly as you can.

Your camera will mount onto the bolt! You’ll be able to use this as a normal table-top tripod or use the flexible legs to grab onto different things like a Gorillapod. Read more at Instructables.

Note: make sure the bolt is a fit for your camera before you get too far into this process.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

When you’re trying to grow a channel on YouTube it can feel like equipment is a barrier, but it shouldn’t be. If you can’t afford a high-end tripod, for example, there are loads of ways to get by without one.

DIY Your Video with Wondershare Filmora

Wondershare Filmora has the best video stabilization tool is your videos have a bad frame or were recorded in dim lights. If a video is shot in bad weather or unfriendly situation where you don’t have all the equipment required for a quality recording, Wondershare Filmora can help you in the background to edit your videos like a pro. And it has all the relevant tools like effects, transitions, background removal, overlays, and background music that could turn your normal video to a professional one.

Here are 3 of our favorite DIY tripods.

DIY smartphone tripod using binder clips or hair clips

You’re a solo operation and your best camera is on your phone. That’s pretty common.

If you have a DSLR then you can set it down on any stable surface while filming yourself, but your phone can’t stand up by itself. It needs something or someone to hold it. Do you just accept that and shoot everything as a selfie?

No. No, you don’t, because there are common household items that can help you out of this problem. For this DIY tripod, you need either 2 binder clips or 2 ‘claw clips’ (also called ‘hair jaws’).

Hold your phone in landscape mode (horizontally, so it’s long rather than tall) and attach clips to the bottom corners. If you are worried about scratching your screen, fold up some paper to place between your clip and your phone.

Here it is with binder clips:

And here it is with hair clips:

Now you can set your smartphone upon any stable surface, like a table or a stack of books.

Here are some more cool ideas!

DIY adjustable tripod using books and a towel

You’ve probably heard a million times that you can stabilize your camera by sitting it down on any stable surface – on your desk, on a stack of books, up in a tree, etc. This is very true!

But if you can use any stable surface, why do people buy tripods?

Because it isn’t convenient to rearrange your furniture whenever you want to make a video, and also because tripods are adjustable. You can change their height, you can use them to pan or tilt, and it’s pretty easy to move them a bit forwards or backward while you’re setting up your shot.

To get similar functions from the ‘any stable surface’ solution you can use a table, a stack of books, and a towel.

1. Set up the area where you’re going to sit while you’re filming on one end of the table.
2. Put the towel down over the approximate spot you want your camera to be.
3. Stack your books on top of the towel.
4. Put your camera on top of the books.

Now if your camera isn’t up high enough, or is too high, you can adjust it just by adding or taking away books. If you want to move it closer or farther away from you, just pull the towel forwards or backward.

DIY gripping ‘Gorillapod’ using wire and tape

Gorillapod’s are cool because you can use them like normal tripods, carry them around like selfie sticks, or attach them to things like fences and posts. Here’s how you can make something similar using wire, electrical tape or duct tape, and a 1/4 bolt.

Your wire should be fairly stiff and you’ll need three pieces the same length, which should be at least 10 inches. Old clothes hangers work well. This needs to be something strong enough to support the weight of your camera, but soft enough that it’s not impossible for you to bend.

All of your supplies plus the finished product.

Readying your legs

Step 1: Bend 2 inches at one end of each wire into a ‘U’ shape. You will probably need pliers for this.

Step 2: Pick up one of your pieces of wire and wrap one end with electrical tape. Go around 5-10 times (to prevent it from coming undone at the end) and then, without cutting your tape, start moving up and wrapping the rest of your wire. Stop before your ‘U’ section.

Repeat this with the other two wires.

Attaching your legs

Step 1: Place the ‘U’ section of a leg against your bolt. The bolt’s threading should be pointing away from the leg. Now, use your tape to attach them. Wind it around 2 or 3 times, then repeat the process with both of the other legs individually.

Step 2: After all the legs are attached, wrap some more tape around all 3 as tightly as you can.

Your camera will mount onto the bolt! You’ll be able to use this as a normal table-top tripod or use the flexible legs to grab onto different things like a Gorillapod. Read more at Instructables.

Note: make sure the bolt is a fit for your camera before you get too far into this process.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

When you’re trying to grow a channel on YouTube it can feel like equipment is a barrier, but it shouldn’t be. If you can’t afford a high-end tripod, for example, there are loads of ways to get by without one.

DIY Your Video with Wondershare Filmora

Wondershare Filmora has the best video stabilization tool is your videos have a bad frame or were recorded in dim lights. If a video is shot in bad weather or unfriendly situation where you don’t have all the equipment required for a quality recording, Wondershare Filmora can help you in the background to edit your videos like a pro. And it has all the relevant tools like effects, transitions, background removal, overlays, and background music that could turn your normal video to a professional one.

Here are 3 of our favorite DIY tripods.

DIY smartphone tripod using binder clips or hair clips

You’re a solo operation and your best camera is on your phone. That’s pretty common.

If you have a DSLR then you can set it down on any stable surface while filming yourself, but your phone can’t stand up by itself. It needs something or someone to hold it. Do you just accept that and shoot everything as a selfie?

No. No, you don’t, because there are common household items that can help you out of this problem. For this DIY tripod, you need either 2 binder clips or 2 ‘claw clips’ (also called ‘hair jaws’).

Hold your phone in landscape mode (horizontally, so it’s long rather than tall) and attach clips to the bottom corners. If you are worried about scratching your screen, fold up some paper to place between your clip and your phone.

Here it is with binder clips:

And here it is with hair clips:

Now you can set your smartphone upon any stable surface, like a table or a stack of books.

Here are some more cool ideas!

DIY adjustable tripod using books and a towel

You’ve probably heard a million times that you can stabilize your camera by sitting it down on any stable surface – on your desk, on a stack of books, up in a tree, etc. This is very true!

But if you can use any stable surface, why do people buy tripods?

Because it isn’t convenient to rearrange your furniture whenever you want to make a video, and also because tripods are adjustable. You can change their height, you can use them to pan or tilt, and it’s pretty easy to move them a bit forwards or backward while you’re setting up your shot.

To get similar functions from the ‘any stable surface’ solution you can use a table, a stack of books, and a towel.

1. Set up the area where you’re going to sit while you’re filming on one end of the table.
2. Put the towel down over the approximate spot you want your camera to be.
3. Stack your books on top of the towel.
4. Put your camera on top of the books.

Now if your camera isn’t up high enough, or is too high, you can adjust it just by adding or taking away books. If you want to move it closer or farther away from you, just pull the towel forwards or backward.

DIY gripping ‘Gorillapod’ using wire and tape

Gorillapod’s are cool because you can use them like normal tripods, carry them around like selfie sticks, or attach them to things like fences and posts. Here’s how you can make something similar using wire, electrical tape or duct tape, and a 1/4 bolt.

Your wire should be fairly stiff and you’ll need three pieces the same length, which should be at least 10 inches. Old clothes hangers work well. This needs to be something strong enough to support the weight of your camera, but soft enough that it’s not impossible for you to bend.

All of your supplies plus the finished product.

Readying your legs

Step 1: Bend 2 inches at one end of each wire into a ‘U’ shape. You will probably need pliers for this.

Step 2: Pick up one of your pieces of wire and wrap one end with electrical tape. Go around 5-10 times (to prevent it from coming undone at the end) and then, without cutting your tape, start moving up and wrapping the rest of your wire. Stop before your ‘U’ section.

Repeat this with the other two wires.

Attaching your legs

Step 1: Place the ‘U’ section of a leg against your bolt. The bolt’s threading should be pointing away from the leg. Now, use your tape to attach them. Wind it around 2 or 3 times, then repeat the process with both of the other legs individually.

Step 2: After all the legs are attached, wrap some more tape around all 3 as tightly as you can.

Your camera will mount onto the bolt! You’ll be able to use this as a normal table-top tripod or use the flexible legs to grab onto different things like a Gorillapod. Read more at Instructables.

Note: make sure the bolt is a fit for your camera before you get too far into this process.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Also read: